Add dt-bindings document for the RZ/V2M PWC Power OFF driver. Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx> --- .../reset/renesas,rzv2m-pwc-poweroff.yaml | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/reset/renesas,rzv2m-pwc-poweroff.yaml diff --git a/Documentation/devicetree/bindings/power/reset/renesas,rzv2m-pwc-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/renesas,rzv2m-pwc-poweroff.yaml new file mode 100644 index 000000000000..12456e3e93e6 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/renesas,rzv2m-pwc-poweroff.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/renesas,rzv2m-pwc-poweroff.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2M External Power Sequence Controller (PWC) Power OFF + +description: |+ + The PWC IP found in the RZ/V2M family of chips comes with the below + capabilities + - external power supply on/off sequence generation + - on/off signal generation for the LPDDR4 core power supply (LPVDD) + - key input signals processing + - general-purpose output pins + This node uses syscon to map the registers relevant to Power OFF (the + register map is retrieved from the parent dt-node), and the node should be + represented as a sub node of a "syscon", "simple-mfd" node. + +maintainers: + - Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx> + +properties: + compatible: + items: + - enum: + - renesas,r9a09g011-pwc-poweroff # RZ/V2M + - renesas,r9a09g055-pwc-poweroff # RZ/V2MA + - const: renesas,rzv2m-pwc-poweroff + + regmap: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + Phandle to the register map node. + +required: + - compatible + - regmap + +additionalProperties: false + +examples: + - | + poweroff { + compatible = "renesas,r9a09g011-pwc-poweroff", + "renesas,rzv2m-pwc-poweroff"; + regmap = <®mapnode>; + }; -- 2.34.1