[PATCH] pinctrl: sunxi: d1: Add CAN bus pinmuxes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Fabien Poussin <fabien.poussin@xxxxxxxxx>

The D1 pin controller contains muxes for two CAN buses. While the CAN
bus controllers are only documented for the T113 SoC, the pin controller
is the same across all SoC variants.

Signed-off-by: Fabien Poussin <fabien.poussin@xxxxxxxxx>
Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
---

 drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c b/drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c
index 40858b881298..9cc94be1046d 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c
@@ -47,6 +47,7 @@ static const struct sunxi_desc_pin d1_pins[] = {
 		SUNXI_FUNCTION(0x5, "i2s2_din"),	/* DIN2 */
 		SUNXI_FUNCTION(0x6, "lcd0"),		/* D18 */
 		SUNXI_FUNCTION(0x7, "uart4"),		/* TX */
+		SUNXI_FUNCTION(0x8, "can0"),		/* TX */
 		SUNXI_FUNCTION_IRQ_BANK(0xe, 0, 2)),
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 3),
 		SUNXI_FUNCTION(0x0, "gpio_in"),
@@ -57,6 +58,7 @@ static const struct sunxi_desc_pin d1_pins[] = {
 		SUNXI_FUNCTION(0x5, "i2s2_din"),	/* DIN0 */
 		SUNXI_FUNCTION(0x6, "lcd0"),		/* D19 */
 		SUNXI_FUNCTION(0x7, "uart4"),		/* RX */
+		SUNXI_FUNCTION(0x8, "can0"),		/* RX */
 		SUNXI_FUNCTION_IRQ_BANK(0xe, 0, 3)),
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 4),
 		SUNXI_FUNCTION(0x0, "gpio_in"),
@@ -67,6 +69,7 @@ static const struct sunxi_desc_pin d1_pins[] = {
 		SUNXI_FUNCTION(0x5, "i2s2_din"),	/* DIN1 */
 		SUNXI_FUNCTION(0x6, "lcd0"),		/* D20 */
 		SUNXI_FUNCTION(0x7, "uart5"),		/* TX */
+		SUNXI_FUNCTION(0x8, "can1"),		/* TX */
 		SUNXI_FUNCTION_IRQ_BANK(0xe, 0, 4)),
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 5),
 		SUNXI_FUNCTION(0x0, "gpio_in"),
@@ -77,6 +80,7 @@ static const struct sunxi_desc_pin d1_pins[] = {
 		SUNXI_FUNCTION(0x5, "pwm0"),
 		SUNXI_FUNCTION(0x6, "lcd0"),		/* D21 */
 		SUNXI_FUNCTION(0x7, "uart5"),		/* RX */
+		SUNXI_FUNCTION(0x8, "can1"),		/* RX */
 		SUNXI_FUNCTION_IRQ_BANK(0xe, 0, 5)),
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 6),
 		SUNXI_FUNCTION(0x0, "gpio_in"),
-- 
2.37.4




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux