Re: [PATCH v2 3/5] dt-bindings: pinctrl: Add StarFive JH7110 aon pinctrl

[Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>]

On 18/11/2022 02:11, Hal Feng wrote:
> From: Jianlong Huang <jianlong.huang@xxxxxxxxxxxxxxxx>
> 
> Add pinctrl bindings for StarFive JH7110 SoC aon pinctrl controller.
> 
> Signed-off-by: Jianlong Huang <jianlong.huang@xxxxxxxxxxxxxxxx>
> Signed-off-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
> ---
>  .../pinctrl/starfive,jh7110-aon-pinctrl.yaml  | 134 ++++++++++++++++++
>  1 file changed, 134 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml
> new file mode 100644
> index 000000000000..1dd000e1f614
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml
> @@ -0,0 +1,134 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/starfive,jh7110-aon-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive JH7110 Aon Pin Controller
> +
> +description: |
> +  Bindings for the JH7110 RISC-V SoC from StarFive Technology Ltd.
> +
> +  Out of the SoC's many pins only the ones named PAD_GPIO0 to PAD_GPIO4
> +  can be multiplexed and have configurable bias, drive strength,
> +  schmitt trigger etc.
> +  Some peripherals have their I/O go through the 4 "GPIOs". This also
> +  includes PWM.
> +
> +maintainers:
> +  - Jianlong Huang <jianlong.huang@xxxxxxxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    const: starfive,jh7110-aon-pinctrl
> +
> +  reg:
> +    maxItems: 1
> +
> +  reg-names:
> +    items:
> +      - const: control
> +
> +  clocks:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +  gpio-controller: true
> +
> +  "#gpio-cells":
> +    const: 2
> +
> +  interrupts:
> +    maxItems: 1
> +    description: The GPIO parent interrupt.

Same comments apply plus one more.

> +
> +  interrupt-controller: true
> +
> +  "#interrupt-cells":
> +    const: 2
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - gpio-controller
> +  - "#gpio-cells"
> +  - interrupts
> +  - interrupt-controller
> +  - "#interrupt-cells"

"required:" goes after patternProperties.

> +
> +patternProperties:
> +  '-[0-9]+$':

Same comment.

> +    type: object
> +    patternProperties:
> +      '-pins$':
> +        type: object
> +        description: |
> +          A pinctrl node should contain at least one subnode representing the
> +          pinctrl groups available on the machine. Each subnode will list the
> +          pins it needs, and how they should be configured, with regard to
> +          muxer configuration, system signal configuration, pin groups for
> +          vin/vout module, pin voltage, mux functions for output, mux functions
> +          for output enable, mux functions for input.
> +
> +        properties:
> +          pinmux:
> +            description: |
> +              The list of GPIOs and their mux settings that properties in the
> +              node apply to. This should be set using the GPIOMUX macro.
> +            $ref: "/schemas/pinctrl/pinmux-node.yaml#/properties/pinmux"
> +
> +          bias-disable: true
> +
> +          bias-pull-up:
> +            type: boolean
> +
> +          bias-pull-down:
> +            type: boolean
> +
> +          drive-strength:
> +            enum: [ 2, 4, 8, 12 ]
> +
> +          input-enable: true
> +
> +          input-disable: true
> +
> +          input-schmitt-enable: true
> +
> +          input-schmitt-disable: true
> +
> +          slew-rate:
> +            maximum: 1
> +
> +        additionalProperties: false
> +
> +    additionalProperties: false
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/starfive-jh7110.h>
> +    #include <dt-bindings/reset/starfive-jh7110.h>
> +    #include <dt-bindings/pinctrl/pinctrl-starfive-jh7110.h>
> +
> +        soc {
> +                #address-cells = <2>;
> +                #size-cells = <2>;

Same comment.

> +
> +                gpioa: gpio@17020000 {
> +                        compatible = "starfive,jh7110-aon-pinctrl";
> +                        reg = <0x0 0x17020000 0x0 0x10000>;
> +                        reg-names = "control";
> +                        resets = <&aoncrg_rst JH7110_AONRST_AON_IOMUX>;
> +                        interrupts = <85>;
> +                        interrupt-controller;
> +                        #interrupt-cells = <2>;
> +                        #gpio-cells = <2>;
> +                        gpio-controller;
> +                };
> +        };
> +
> +...

Best regards,
Krzysztof