[PATCH] gpio: sl28cpld: Replace irqchip mask_invert with unmask_base

[Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>]

Remove use of the deprecated mask_invert flag. Inverted mask
registers (where a '1' bit enables an IRQ) can be described more
directly as an unmask register.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
---
 drivers/gpio/gpio-sl28cpld.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-sl28cpld.c b/drivers/gpio/gpio-sl28cpld.c
index 52404736ac86..2195f88c2048 100644
--- a/drivers/gpio/gpio-sl28cpld.c
+++ b/drivers/gpio/gpio-sl28cpld.c
@@ -70,8 +70,7 @@ static int sl28cpld_gpio_irq_init(struct platform_device *pdev,
 	irq_chip->num_irqs = ARRAY_SIZE(sl28cpld_gpio_irqs);
 	irq_chip->num_regs = 1;
 	irq_chip->status_base = base + GPIO_REG_IP;
-	irq_chip->mask_base = base + GPIO_REG_IE;
-	irq_chip->mask_invert = true;
+	irq_chip->unmask_base = base + GPIO_REG_IE;
 	irq_chip->ack_base = base + GPIO_REG_IP;
 
 	ret = devm_regmap_add_irq_chip_fwnode(dev, dev_fwnode(dev),
-- 
2.38.1