Re: [PATCH 1/2] dt-bindings: pinctrl: qcom,msm8916: convert to dtschema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 09 Nov 2022 11:44:01 +0100, Krzysztof Kozlowski wrote:
> Convert Qualcomm MSM8916 pin controller bindings to DT schema.  Keep the
> parsing of pin configuration subnodes consistent with other Qualcomm
> schemas (children named with '-state' suffix, their children with
> '-pins').
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
>  .../bindings/pinctrl/qcom,msm8916-pinctrl.txt | 195 ------------------
>  .../pinctrl/qcom,msm8916-pinctrl.yaml         | 166 +++++++++++++++
>  2 files changed, 166 insertions(+), 195 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml
> 

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/


pinctrl@1000000: 'accel-int-default', 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-flash-default', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ctp-pwr-en-default', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'gpio-keys-default', 'gyro-int-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'light-int-default', 'magn-int-default', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'tp-int-default', 'wcnss-active' do not match any of the regexes: '-state$', 'pinct
 rl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dtb

pinctrl@1000000: 'accel-int-default', 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'fg-alert-default', 'gpio-hall-sensor-default', 'gpio-keys-default', 'gpio-led-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'mdss', 'motor-en-default', 'muic-i2c-default', 'muic-int-default', 'nfc-default', 'nfc-i2c-default', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'tkey-default', 'tke
 y-en-default', 'tkey-i2c-default', 'ts-int-default', 'tsp-en-default', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dtb
	arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dtb

pinctrl@1000000: 'accel-int-default', 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'fg-alert-default', 'gpio-hall-sensor-default', 'gpio-keys-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'mdss', 'motor-en-default', 'muic-i2c-default', 'muic-int-default', 'nfc-default', 'nfc-i2c-default', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'tkey-default', 'tkey-en-default', 'tkey
 -i2c-default', 'ts-int-default', 'tsp-en-default', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dtb
	arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dtb
	arch/arm/boot/dts/qcom-msm8916-samsung-e5.dtb
	arch/arm/boot/dts/qcom-msm8916-samsung-e7.dtb

pinctrl@1000000: 'accel-int-default', 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'fg-alert-default', 'gpio-hall-sensor-default', 'gpio-keys-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'mdss', 'muic-i2c-default', 'muic-int-default', 'nfc-default', 'nfc-i2c-default', 'panel-vdd3-default', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'tkey-default', 'tkey-en-default', 'tk
 ey-i2c-default', 'tkey-led-en-default', 'ts-int-default', 'tsp-en-default', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dtb

pinctrl@1000000: 'accel-int-default', 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'fg-alert-default', 'gpio-hall-sensor-default', 'gpio-keys-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'mdss', 'muic-i2c-default', 'muic-int-default', 'nfc-default', 'nfc-i2c-default', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'tkey-default', 'tkey-en-default', 'tkey-i2c-default', 'ts-i
 nt-default', 'tsp-en-default', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dtb

pinctrl@1000000: 'accel-int-default', 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'gpio-keys-default', 'gyro-int-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'mag-reset-default', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'proximity-int-default', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'ts-int-reset-default', 'usb-id-default', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dtb

pinctrl@1000000: 'accel-irq-default', 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'gpio-keys-default', 'gpio-leds-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'mag-reset-default', 'nfc-default', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'prox-irq-default', 'reg-lcd-en-default', 'sdhc2-cd-default', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'ts-irq-default', 'usb-id-default', 'wcnss-active' do not match any of 
 the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dtb

pinctrl@1000000: 'adv533-int-active', 'adv7533-int-suspend', 'adv7533-switch-active', 'adv7533-switch-suspend', 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'msm-key-volp-n-default', 'msmgpio-leds', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'usb-id-default', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/apq8016-sbc.dtb
	arch/arm/boot/dts/qcom-apq8016-sbc.dtb

pinctrl@1000000: 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'button-backlight-default', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'gpio-keys-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'mag-reset-default', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'usb-id-default', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dtb

pinctrl@1000000: 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'fg-alert-default', 'gpio-hall-sensor-default', 'gpio-keys-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'imu-irq-default', 'muic-i2c-default', 'muic-irq-default', 'nfc-default', 'nfc-i2c-default', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'tkey-default', 'tkey-en-default', 'tkey-i2c-default', 'tkey-led-en-de
 fault', 'tsp-en-default', 'tsp-irq-default', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dtb
	arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dtb

pinctrl@1000000: 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'gpio-keys-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'imu-default', 'mag-reset-default', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'sd-vmmc-en-default', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'touchscreen-default', 'usb-id-default', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dtb

pinctrl@1000000: 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'gpio-keys-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'imu-default', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'touchscreen-default', 'usb-id-default', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dtb

pinctrl@1000000: 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'gpio-keys-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dtb

pinctrl@1000000: 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-mtp.dtb




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux