[PATCH v3 4/4] arm64: tegra: Separate AON pinmux from main pinmux on Tegra194

[Thierry Reding <thierry.reding@xxxxxxxxx>]

From: Thierry Reding <treding@xxxxxxxxxx>

The registers for the AON pinmux reside in a partition different from
the registers for the main pinmux. Instead of treating them as one and
the same device, split them up so that they are each their own devices.
Also add gpio-ranges properties to the corresponding GPIO controllers
such that the pinmux and GPIO controllers can be paired up properly.

Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 28740c014f1d..6829ee8b50ee 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -86,6 +86,7 @@ gpio: gpio@2200000 {
 			interrupt-controller;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pinmux 0 0 169>;
 		};
 
 		cbb-noc@2300000 {
@@ -626,9 +627,7 @@ tegra_asrc: asrc@2910000 {
 
 		pinmux: pinmux@2430000 {
 			compatible = "nvidia,tegra194-pinmux";
-			reg = <0x2430000 0x17000>,
-			      <0xc300000 0x4000>;
-
+			reg = <0x2430000 0x17000>;
 			status = "okay";
 
 			pex_rst_c5_out_state: pex_rst_c5_out {
@@ -1660,6 +1659,14 @@ gpio_aon: gpio@c2f0000 {
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-range = <&pinmux_aon 0 0 30>;
+		};
+
+		pinmux_aon: pinmux@c300000 {
+			compatible = "nvidia,tegra194-pinmux-aon";
+			reg = <0xc300000 0x4000>;
+
+			status = "okay";
 		};
 
 		pwm4: pwm@c340000 {
-- 
2.38.1