Re: [PATCH v2 2/2] pinctrl: qcom: Add QDU1000/QRU1000 pinctrl driver

[Melody Olvera <quic_molvera@xxxxxxxxxxx>]

On 10/15/2022 6:40 AM, Krzysztof Kozlowski wrote:
> On 14/10/2022 18:10, Melody Olvera wrote:
>> Add pin control driver for the TLMM block found in the QDU1000
>> and QRU1000 SoC.
>>
>> Signed-off-by: Melody Olvera <quic_molvera@xxxxxxxxxxx>
>> ---
>>  drivers/pinctrl/qcom/Kconfig           |    9 +
>>  drivers/pinctrl/qcom/Makefile          |    1 +
>>  drivers/pinctrl/qcom/pinctrl-qdu1000.c | 1274 ++++++++++++++++++++++++
>>  3 files changed, 1284 insertions(+)
>>  create mode 100644 drivers/pinctrl/qcom/pinctrl-qdu1000.c
>>
>> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
>> index 9dc2d803a586..4ab857dc2847 100644
>> --- a/drivers/pinctrl/qcom/Kconfig
>> +++ b/drivers/pinctrl/qcom/Kconfig
>> @@ -248,6 +248,15 @@ config PINCTRL_QCOM_SSBI_PMIC
>>  	 which are using SSBI for communication with SoC. Example PMIC's
>>  	 devices are pm8058 and pm8921.
>>  
>> +config PINCTRL_QDU1000
>> +	tristate "Qualcomm Tehcnologies Inc QDU1000/QRU1000 pin controller driver"
>> +	depends on GPIOLIB && OF
> depends on ARM64 || COMPILE_TEST
Will add.
>> +	depends on PINCTRL_MSM
>> +	help
>> +	  This is the pinctrl, pinmux, pinconf, and gpiolib driver for the
>> +	  Qualcomm Technologies Inc TLMM block found on the Qualcomm
>> +	  Technologies Inc QDU1000 and QRU1000 platforms.
>> +
> (...)
>
>> +	PINCTRL_PIN(138, "GPIO_138"),
>> +	PINCTRL_PIN(139, "GPIO_139"),
>> +	PINCTRL_PIN(140, "GPIO_140"),
>> +	PINCTRL_PIN(141, "GPIO_141"),
>> +	PINCTRL_PIN(142, "GPIO_142"),
>> +	PINCTRL_PIN(143, "GPIO_143"),
>> +	PINCTRL_PIN(144, "GPIO_144"),
>> +	PINCTRL_PIN(145, "GPIO_145"),
>> +	PINCTRL_PIN(146, "GPIO_146"),
>> +	PINCTRL_PIN(147, "GPIO_147"),
>> +	PINCTRL_PIN(148, "GPIO_148"),
>> +	PINCTRL_PIN(149, "GPIO_149"),
>> +	PINCTRL_PIN(150, "GPIO_150"),
> Your bindings said you have GPIOs 0-149, not 0-150.
Updated bindings.
>
>> +	PINCTRL_PIN(151, "SDC1_RCLK"),
>> +	PINCTRL_PIN(152, "SDC1_CLK"),
>> +	PINCTRL_PIN(153, "SDC1_CMD"),
>> +	PINCTRL_PIN(154, "SDC1_DATA"),
> This also does not match bindings.
Updated bindings.

Thanks,
Melody