[PATCH] pinctrl: rockchip: list all pins in a possible mux route for PX30

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>

The mux routes are incomplete for the PX30. This was discovered because
we had a HW design using cif-clkoutm1 with the correct pinmux in the
Device Tree but the clock would still not work.

There are actually two muxing required: the pin muxing (performed by the
usual Device Tree pinctrl nodes) and the "function" muxing (m0 vs m1;
performed by the mux routing inside the driver). The pin muxing was
correct but the function muxing was not.

This adds the missing pins and their configuration for the mux routes
that are already specified in the driver.

Note that there are some "conflicts": it is possible *in Device Tree* to
(attempt to) mux the pins for e.g. clkoutm1 and clkinm0 at the same time
but this is actually not possible in hardware (because both share the
same bit for the function muxing). Since it is an impossible hardware
design, it is not deemed necessary to prevent the user from attempting
to "misconfigure" the pins/functions.

Fixes: 87065ca9b8e5 ("pinctrl: rockchip: Add pinctrl support for PX30")
Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
---
rockchip: px30: fix missing m0/m1 function muxes m0/m1

The mux routes are incomplete for the PX30. This was discovered because
we had a HW design using cif-clkoutm1 with the correct pinmux in the
Device Tree but the clock would still not work.

There are actually two muxing required: the pin muxing (performed by the
usual Device Tree pinctrl nodes) and the "function" muxing (m0 vs m1;
performed by the mux routing inside the driver). The pin muxing was
correct but the function muxing was not.

This adds the missing pins and their configuration for the mux routes
that are already specified in the driver.

Note that there are some "conflicts": it is possible *in Device Tree* to
(attempt to) mux the pins for e.g. clkoutm1 and clkinm0 at the same time
but this is actually not possible in hardware (because both share the
same bit for the function muxing). Since it is an impossible hardware
design, it is not deemed necessary to prevent the user from attempting
to "misconfigure" the pins/functions.

Note that only cif-clkoutm1 feature was tested out of the dozens of added pins.

Cheers,
Quentin

To: Linus Walleij <linus.walleij@xxxxxxxxxx>
To: Heiko Stuebner <heiko@xxxxxxxxx>
To: David Wu <david.wu@xxxxxxxxxxxxxx>
Cc: linux-gpio@xxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-rockchip@xxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
---
 drivers/pinctrl/pinctrl-rockchip.c | 40 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 53bdfc40f0558..da974ff2d75d0 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -679,14 +679,54 @@ static void rockchip_get_recalced_mux(struct rockchip_pin_bank *bank, int pin,
 }
 
 static struct rockchip_mux_route_data px30_mux_route_data[] = {
+	RK_MUXROUTE_SAME(2, RK_PB4, 1, 0x184, BIT(16 + 7)), /* cif-d0m0 */
+	RK_MUXROUTE_SAME(3, RK_PA1, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d0m1 */
+	RK_MUXROUTE_SAME(2, RK_PB6, 1, 0x184, BIT(16 + 7)), /* cif-d1m0 */
+	RK_MUXROUTE_SAME(3, RK_PA2, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d1m1 */
 	RK_MUXROUTE_SAME(2, RK_PA0, 1, 0x184, BIT(16 + 7)), /* cif-d2m0 */
 	RK_MUXROUTE_SAME(3, RK_PA3, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d2m1 */
+	RK_MUXROUTE_SAME(2, RK_PA1, 1, 0x184, BIT(16 + 7)), /* cif-d3m0 */
+	RK_MUXROUTE_SAME(3, RK_PA5, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d3m1 */
+	RK_MUXROUTE_SAME(2, RK_PA2, 1, 0x184, BIT(16 + 7)), /* cif-d4m0 */
+	RK_MUXROUTE_SAME(3, RK_PA7, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d4m1 */
+	RK_MUXROUTE_SAME(2, RK_PA3, 1, 0x184, BIT(16 + 7)), /* cif-d5m0 */
+	RK_MUXROUTE_SAME(3, RK_PB0, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d5m1 */
+	RK_MUXROUTE_SAME(2, RK_PA4, 1, 0x184, BIT(16 + 7)), /* cif-d6m0 */
+	RK_MUXROUTE_SAME(3, RK_PB1, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d6m1 */
+	RK_MUXROUTE_SAME(2, RK_PA5, 1, 0x184, BIT(16 + 7)), /* cif-d7m0 */
+	RK_MUXROUTE_SAME(3, RK_PB4, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d7m1 */
+	RK_MUXROUTE_SAME(2, RK_PA6, 1, 0x184, BIT(16 + 7)), /* cif-d8m0 */
+	RK_MUXROUTE_SAME(3, RK_PB6, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d8m1 */
+	RK_MUXROUTE_SAME(2, RK_PA7, 1, 0x184, BIT(16 + 7)), /* cif-d9m0 */
+	RK_MUXROUTE_SAME(3, RK_PB7, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d9m1 */
+	RK_MUXROUTE_SAME(2, RK_PB7, 1, 0x184, BIT(16 + 7)), /* cif-d10m0 */
+	RK_MUXROUTE_SAME(3, RK_PC6, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d10m1 */
+	RK_MUXROUTE_SAME(2, RK_PC0, 1, 0x184, BIT(16 + 7)), /* cif-d11m0 */
+	RK_MUXROUTE_SAME(3, RK_PC7, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d11m1 */
+	RK_MUXROUTE_SAME(2, RK_PB0, 1, 0x184, BIT(16 + 7)), /* cif-vsyncm0 */
+	RK_MUXROUTE_SAME(3, RK_PD1, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-vsyncm1 */
+	RK_MUXROUTE_SAME(2, RK_PB1, 1, 0x184, BIT(16 + 7)), /* cif-hrefm0 */
+	RK_MUXROUTE_SAME(3, RK_PD2, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-hrefm1 */
+	RK_MUXROUTE_SAME(2, RK_PB2, 1, 0x184, BIT(16 + 7)), /* cif-clkinm0 */
+	RK_MUXROUTE_SAME(3, RK_PD3, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-clkinm1 */
+	RK_MUXROUTE_SAME(2, RK_PB3, 1, 0x184, BIT(16 + 7)), /* cif-clkoutm0 */
+	RK_MUXROUTE_SAME(3, RK_PD0, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-clkoutm1 */
 	RK_MUXROUTE_SAME(3, RK_PC6, 2, 0x184, BIT(16 + 8)), /* pdm-m0 */
 	RK_MUXROUTE_SAME(2, RK_PC6, 1, 0x184, BIT(16 + 8) | BIT(8)), /* pdm-m1 */
+	RK_MUXROUTE_SAME(3, RK_PD3, 2, 0x184, BIT(16 + 8)), /* pdm-sdi0m0 */
+	RK_MUXROUTE_SAME(2, RK_PC5, 2, 0x184, BIT(16 + 8) | BIT(8)), /* pdm-sdi0m1 */
 	RK_MUXROUTE_SAME(1, RK_PD3, 2, 0x184, BIT(16 + 10)), /* uart2-rxm0 */
 	RK_MUXROUTE_SAME(2, RK_PB6, 2, 0x184, BIT(16 + 10) | BIT(10)), /* uart2-rxm1 */
+	RK_MUXROUTE_SAME(1, RK_PD2, 2, 0x184, BIT(16 + 10)), /* uart2-txm0 */
+	RK_MUXROUTE_SAME(2, RK_PB4, 2, 0x184, BIT(16 + 10) | BIT(10)), /* uart2-txm1 */
 	RK_MUXROUTE_SAME(0, RK_PC1, 2, 0x184, BIT(16 + 9)), /* uart3-rxm0 */
 	RK_MUXROUTE_SAME(1, RK_PB7, 2, 0x184, BIT(16 + 9) | BIT(9)), /* uart3-rxm1 */
+	RK_MUXROUTE_SAME(0, RK_PC0, 2, 0x184, BIT(16 + 9)), /* uart3-txm0 */
+	RK_MUXROUTE_SAME(1, RK_PB6, 2, 0x184, BIT(16 + 9) | BIT(9)), /* uart3-txm1 */
+	RK_MUXROUTE_SAME(0, RK_PC2, 2, 0x184, BIT(16 + 9)), /* uart3-ctsm0 */
+	RK_MUXROUTE_SAME(1, RK_PB4, 2, 0x184, BIT(16 + 9) | BIT(9)), /* uart3-ctsm1 */
+	RK_MUXROUTE_SAME(0, RK_PC3, 2, 0x184, BIT(16 + 9)), /* uart3-rtsm0 */
+	RK_MUXROUTE_SAME(1, RK_PB5, 2, 0x184, BIT(16 + 9) | BIT(9)), /* uart3-rtsm1 */
 };
 
 static struct rockchip_mux_route_data rv1126_mux_route_data[] = {

---
base-commit: 9abf2313adc1ca1b6180c508c25f22f9395cc780
change-id: 20221017-upstream-px30-cif-clkoutm1-a74d42654367

Best regards,
-- 
Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux