[PATCH 0/2] pinctrl: pinctrl-zynqmp: Revert output-enable and bias-high-impedance support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Having support for output-enable and bias-high-impedance properties
causing system hang with older Xilinx ZynqMP Platform Management Firmware
because there is missing autodetection feature.
When this feature is implemented, support for these two properties should
bring back.

Sai Krishna Potthuri (2):
  Revert "pinctrl: pinctrl-zynqmp: Add support for output-enable and
    bias-high-impedance"
  Revert "dt-bindings: pinctrl-zynqmp: Add output-enable configuration"

 .../devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml | 4 ----
 drivers/pinctrl/pinctrl-zynqmp.c                         | 9 ---------
 2 files changed, 13 deletions(-)

-- 
2.17.1




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux