[PATCH v2 2/5] arm: dts: qcom: mdm9615: align pinctrl subnodes with dt-schema bindings

[Neil Armstrong <neil.armstrong@xxxxxxxxxx>]

Align the MDM9615 DT to the expected subnodes namings in the dt-schema
bindings.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
 .../boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts  |  8 ++++----
 arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi         | 22 +++++++++++-----------
 2 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
index 4e53b3d70195..30a110984597 100644
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -45,8 +45,8 @@ &msmgpio {
 	 * - 42: IOT0_GPIO1 and SD Card Detect
 	 */
 
-	gpioext1_pins: gpioext1_pins {
-		pins {
+	gpioext1_pins: gpioext1-state {
+		gpioext1-pins {
 			pins = "gpio2";
 			function = "gpio";
 			input-enable;
@@ -54,8 +54,8 @@ pins {
 		};
 	};
 
-	sdc_cd_pins: sdc_cd_pins {
-		pins {
+	sdc_cd_pins: sdc-cd-state {
+		sdc-cd-pins {
 			pins = "gpio42";
 			function = "gpio";
 			drive-strength = <2>;
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
index 2fe8693dc3cd..92c8003dac25 100644
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
@@ -22,8 +22,8 @@ &msmgpio {
 	pinctrl-0 = <&reset_out_pins>;
 	pinctrl-names = "default";
 
-	gsbi3_pins: gsbi3_pins {
-		mux {
+	gsbi3_pins: gsbi3-state {
+		gsbi3-pins {
 			pins = "gpio8", "gpio9", "gpio10", "gpio11";
 			function = "gsbi3";
 			drive-strength = <8>;
@@ -31,8 +31,8 @@ mux {
 		};
 	};
 
-	gsbi4_pins: gsbi4_pins {
-		mux {
+	gsbi4_pins: gsbi4-state {
+		gsbi4-pins {
 			pins = "gpio12", "gpio13", "gpio14", "gpio15";
 			function = "gsbi4";
 			drive-strength = <8>;
@@ -40,15 +40,15 @@ mux {
 		};
 	};
 
-	gsbi5_i2c_pins: gsbi5_i2c_pins {
-		pin16 {
+	gsbi5_i2c_pins: gsbi5-i2c-state {
+		sda-pins {
 			pins = "gpio16";
 			function = "gsbi5_i2c";
 			drive-strength = <8>;
 			bias-disable;
 		};
 
-		pin17 {
+		scl-pins {
 			pins = "gpio17";
 			function = "gsbi5_i2c";
 			drive-strength = <2>;
@@ -56,8 +56,8 @@ pin17 {
 		};
 	};
 
-	gsbi5_uart_pins: gsbi5_uart_pins {
-		mux {
+	gsbi5_uart_pins: gsbi5-uart-state {
+		gsbi5-uart-pins {
 			pins = "gpio18", "gpio19";
 			function = "gsbi5_uart";
 			drive-strength = <8>;
@@ -65,8 +65,8 @@ mux {
 		};
 	};
 
-	reset_out_pins: reset_out_pins {
-		pins {
+	reset_out_pins: reset-out-state {
+		reset-out-pins {
 			pins = "gpio66";
 			function = "gpio";
 			drive-strength = <2>;

-- 
b4 0.10.1