Re: [PATCH v2 34/40] arm64: dts: qcom: sm6125: align TLMM pin configuration with DT schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2022-09-12 08:17:40, Krzysztof Kozlowski wrote:
> DT schema expects TLMM pin configuration nodes to be named with '-state'
> suffix and their optional children with '-pins' suffix.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
>  .../boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts  |  4 ++--
>  arch/arm64/boot/dts/qcom/sm6125.dtsi                   | 10 +++++-----
>  2 files changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> index 0aad2e94e757..6a8b88cc4385 100644
> --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> @@ -87,7 +87,7 @@ &hsusb_phy1 {
>  };
>  
>  &sdc2_off_state {
> -	sd-cd {
> +	sd-cd-pins {
>  		pins = "gpio98";
>  		drive-strength = <2>;
>  		bias-disable;
> @@ -95,7 +95,7 @@ sd-cd {
>  };
>  
>  &sdc2_on_state {
> -	sd-cd {
> +	sd-cd-pins {
>  		pins = "gpio98";
>  		drive-strength = <2>;
>  		bias-pull-up;
> diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> index 8c582a9e4ada..1fe3fa3ad877 100644
> --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> @@ -387,19 +387,19 @@ tlmm: pinctrl@500000 {
>  			#interrupt-cells = <2>;
>  
>  			sdc2_off_state: sdc2-off-state {
> -				clk {
> +				clk-pins {
>  					pins = "sdc2_clk";
>  					drive-strength = <2>;
>  					bias-disable;
>  				};
>  
> -				cmd {
> +				cmd-pins {
>  					pins = "sdc2_cmd";
>  					drive-strength = <2>;
>  					bias-pull-up;
>  				};
>  
> -				data {
> +				data-pins {
>  					pins = "sdc2_data";
>  					drive-strength = <2>;
>  					bias-pull-up;
> @@ -413,13 +413,13 @@ clk {
>  					bias-disable;
>  				};
>  
> -				cmd {
> +				cmd-pins-pins {

Is this double -pins-pins suffix intended?

- Marijn

>  					pins = "sdc2_cmd";
>  					drive-strength = <10>;
>  					bias-pull-up;
>  				};
>  
> -				data {
> +				data-pins {
>  					pins = "sdc2_data";
>  					drive-strength = <10>;
>  					bias-pull-up;
> -- 
> 2.34.1
> 



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux