[PATCH v4 28/34] dt-bindings: pinctrl: qcom,sdx55: fix matching pin config

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The TLMM pin controller follows generic pin-controller bindings, so
should have subnodes with '-state' and '-pins'.  Otherwise the subnodes
(level one and two) are not properly matched.

  qcom-sdx55-telit-fn980-tlb.dtb: pinctrl@f100000: 'pcie_ep_clkreq_default', 'pcie_ep_perst_default', 'pcie_ep_wake_default' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'

This method also unifies the bindings with other Qualcomm TLMM and LPASS
pinctrl bindings.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Bjorn Andersson <andersson@xxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
 .../bindings/pinctrl/qcom,sdx55-pinctrl.yaml       | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
index a38090b14aab..fff57abf4fbc 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
@@ -45,9 +45,17 @@ properties:
   gpio-reserved-ranges:
     maxItems: 1
 
-#PIN CONFIGURATION NODES
 patternProperties:
-  '-pins$':
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sdx55-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sdx55-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sdx55-tlmm-state:
     type: object
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
@@ -146,7 +154,7 @@ examples:
                 #interrupt-cells = <2>;
                 interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
 
-                serial-pins {
+                serial-state {
                         pins = "gpio8", "gpio9";
                         function = "blsp_uart3";
                         drive-strength = <8>;
-- 
2.34.1




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux