[PATCH 1/2] dt-bindings: pinctrl: qcom: Add QDU1000 and QRU1000 pinctrl bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add documentation details for device tree bindings for QDU1000 and QRU1000
TLMM devices.

Signed-off-by: Melody Olvera <quic_molvera@xxxxxxxxxxx>
---
 .../pinctrl/qcom,qdru1000-pinctrl.yaml        | 133 ++++++++++++++++++
 1 file changed, 133 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml
new file mode 100644
index 000000000000..e8d938303231
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. QDU1000/QRU1000 TLMM block
+
+maintainers:
+  - Melody Olvera <quic_molvera@xxxxxxxxxxx>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,qdu1000-tlmm
+      - const: qcom,qru1000-tlmm
+
+  reg:
+    items:
+      - description: Base address of TLMM register space
+      - description: Size of TLMM register space
+
+  interrupts:
+    minItems: 0
+    maxItems: 1
+    items:
+      - const: TLMM summary IRQ
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  wakeup-parent:
+    maxItems: 1
+    description:
+      Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+      a general description of GPIO and interrupt bindings.
+
+      Please refer to pinctrl-bindings.txt in this directory for details of the
+      common pinctrl bindings used by client devices, including the meaning of the
+      phrase "pin configuration node".
+
+      The pin configuration nodes act as a container for an arbitrary number of
+      subnodes. Each of these subnodes represents some desired configuration for a
+      pin, a group, or a list of pins or groups. This configuration can include the
+      mux function to select on those pin(s)/group(s), and various pin configuration
+      parameters, such as pull-up, drive strength, etc.
+
+
+# PIN CONFIGURATION NODES
+patternPropetries:
+  '^.*$':
+    if:
+      type: object
+    then:
+      properties:
+        pins:
+          description:
+            List of gpio pins affected by the properties specified in
+            this subnode.
+          items:
+            oneOf:
+              - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])"
+              - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+            minItems: 1
+            maxItems: 36
+        function:
+          description:
+            Specify the alternative function to be configured for the
+            specified pins. Functions are only valid for gpio pins.
+          enum: [gpio, aon_cam, atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
+            atest_usb0, atest_usb00, atest_usb01, atest_usb02, atest_usb03, audio_ref, cam_mclk,
+            cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+            cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, coex_uart2, cri_trng, cri_trng0,
+            cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1,
+            gcc_gp2, gcc_gp3, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
+            mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s2_data0, mi2s2_data1,
+            mi2s2_sck, mi2s2_ws, mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12,
+            mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6, mss_grfc7, mss_grfc8, mss_grfc9,
+            nav_0, nav_1, nav_2, pcie0_clkreqn, pcie1_clkreqn, phase_flag0, phase_flag1,
+            phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15,
+            phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20,
+            phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26,
+            phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31,
+            phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9, pll_bist,
+            pll_clk, pri_mi2s, prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio,
+            qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
+            qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7,
+            qdss_gpio8, qdss_gpio9, qlink0_enable, qlink0_request, qlink0_wmss, qlink1_enable,
+            qlink1_request, qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1,
+            qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15,
+            qup16, qup17, qup18, qup19, qup2, qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8,
+            qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd,
+            sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
+            tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present,
+            uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac, usb_phy, vfr_0,
+            vfr_1, vsense_trigger]
+        drive-strength:
+          enum: [2, 4, 6, 8, 10, 12, 14, 16]
+          default: 2
+          description:
+            Selects the drive strength for the specified pins, in mA.
+        bias-pull-down: true
+        bias-pull-up: true
+        bias-disable: true
+        output-high: true
+        output-low: true
+      required:
+        - pins
+        - function
+      additionalProperties: false
+
+examples:
+  - |
+    tlmm: pinctrl@03000000 {
+      compatible = "qcom,qdu10000-tlmm";
+      reg = <0x03000000 0xdc2000>;
+      interrupts = <0 208 0>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      wakeup-parent = <&pdc>;
+    };
-- 
2.37.3




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux