Re: [PATCH v1 20/30] dt-bindings: clock: Add starfive,jh7110-clkgen-aon bindings

[Rob Herring <robh@xxxxxxxxxx>]

On Fri, Sep 30, 2022 at 01:56:32PM +0800, Hal Feng wrote:
> From: Emil Renner Berthing <kernel@xxxxxxxx>
> 
> Add bindings for the always-on clock generator on the JH7110
> RISC-V SoC by StarFive Technology Ltd.
> 
> Signed-off-by: Emil Renner Berthing <kernel@xxxxxxxx>
> Signed-off-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxxxxxxxx>
> ---
>  .../clock/starfive,jh7110-clkgen-aon.yaml     | 62 +++++++++++++++++++
>  1 file changed, 62 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-clkgen-aon.yaml
> 
> diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-clkgen-aon.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-clkgen-aon.yaml
> new file mode 100644
> index 000000000000..029ff57b9e3e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-clkgen-aon.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/starfive,jh7110-clkgen-aon.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive JH7110 Always-On Clock Generator
> +
> +maintainers:
> +  - Emil Renner Berthing <kernel@xxxxxxxx>
> +  - Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    const: starfive,jh7110-clkgen-aon
> +
> +  clocks:
> +    items:
> +      - description: Main Oscillator
> +      - description: RTC clock
> +      - description: RMII reference clock
> +      - description: RGMII RX clock
> +      - description: STG AXI/AHB clock
> +      - description: APB Bus clock
> +
> +  clock-names:
> +    items:
> +      - const: osc
> +      - const: clk_rtc
> +      - const: gmac0_rmii_refin
> +      - const: gmac0_rgmii_rxin
> +      - const: stg_axiahb
> +      - const: apb_bus_func
> +
> +  '#clock-cells':
> +    const: 1
> +    description:
> +      See <dt-bindings/clock/starfive-jh7110-aon.h> for valid indices.

No 'reg'? How do you access this h/w then? If it is part of some block, 
we need to see the full picture.

Rob