Re: [PATCH v3 20/34] dt-bindings: pinctrl: qcom,msm8909-tlmm: fix indentation in example

[Stephan Gerhold <stephan@xxxxxxxxxxx>]

On Tue, Sep 27, 2022 at 07:36:48PM +0200, Krzysztof Kozlowski wrote:
> Bindings example should be indented with 4-spaces.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> Reviewed-by: Bjorn Andersson <andersson@xxxxxxxxxx>

Reviewed-by: Stephan Gerhold <stephan@xxxxxxxxxxx>

> ---
>  .../bindings/pinctrl/qcom,msm8909-tlmm.yaml   | 60 +++++++++----------
>  1 file changed, 30 insertions(+), 30 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
> index 08e2dd5cbebe..9c647e24fa9a 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
> @@ -118,35 +118,35 @@ $defs:
>  
>  examples:
>    - |
> -        #include <dt-bindings/interrupt-controller/arm-gic.h>
> -
> -        pinctrl@1000000 {
> -                compatible = "qcom,msm8909-tlmm";
> -                reg = <0x1000000 0x300000>;
> -                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> -                gpio-controller;
> -                #gpio-cells = <2>;
> -                gpio-ranges = <&tlmm 0 0 117>;
> -                interrupt-controller;
> -                #interrupt-cells = <2>;
> -
> -                gpio-wo-subnode-state {
> -                        pins = "gpio1";
> -                        function = "gpio";
> -                };
> -
> -                uart-w-subnodes-state {
> -                        rx-pins {
> -                                pins = "gpio4";
> -                                function = "blsp_uart1";
> -                                bias-pull-up;
> -                        };
> -
> -                        tx-pins {
> -                                pins = "gpio5";
> -                                function = "blsp_uart1";
> -                                bias-disable;
> -                        };
> -                };
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    pinctrl@1000000 {
> +        compatible = "qcom,msm8909-tlmm";
> +        reg = <0x1000000 0x300000>;
> +        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +        gpio-ranges = <&tlmm 0 0 117>;
> +        interrupt-controller;
> +        #interrupt-cells = <2>;
> +
> +        gpio-wo-subnode-state {
> +            pins = "gpio1";
> +            function = "gpio";
>          };
> +
> +        uart-w-subnodes-state {
> +            rx-pins {
> +                pins = "gpio4";
> +                function = "blsp_uart1";
> +                bias-pull-up;
> +            };
> +
> +            tx-pins {
> +                pins = "gpio5";
> +                function = "blsp_uart1";
> +                bias-disable;
> +            };
> +        };
> +    };
>  ...
> -- 
> 2.34.1
>