Re: [PATCH v5 5/5] gpio: pca953x: Add support for PCAL6534

[Linus Walleij <linus.walleij@xxxxxxxxxx>]

On Wed, Sep 14, 2022 at 5:16 PM Martyn Welch
<martyn.welch@xxxxxxxxxxxxxxx> wrote:

> From: Martyn Welch <martyn.welch@xxxxxxxxxxxxx>
>
> Add support for the NXP PCAL6534. This device is broadly a 34-bit version
> of the PCAL6524. However, whilst the registers are broadly what you'd
> expect for a 34-bit version of the PCAL6524, the spacing of the registers
> has been compacted. This has the unfortunate effect of breaking the bit
> shift based mechanism that is employed to work out register locations used
> by the other chips supported by this driver. To accommodate ths, callback
> functions have been added to allow alterate implementations of
> pca953x_recalc_addr() and pca953x_check_register() for the PCAL6534.
>
> Datasheet: https://www.nxp.com/docs/en/data-sheet/PCAL6534.pdf
> Datasheet: https://www.diodes.com/assets/Datasheets/PI4IOE5V6534Q.pdf
> Signed-off-by: Martyn Welch <martyn.welch@xxxxxxxxxxxxx>

Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>

Yours,
Linus Walleij