Re: [PATCH v1 06/11] PCI: aardvark: switch to using devm_gpiod_get_optional()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 05, 2022 at 09:00:46AM +0200, Pali Rohár wrote:
> On Sunday 04 September 2022 23:30:58 Dmitry Torokhov wrote:
> > I would like to stop exporting OF-specific devm_gpiod_get_from_of_node()
> > so that gpiolib can be cleaned a bit, so let's switch to the generic
> > device property API.
> > 
> > I believe that the only reason the driver, instead of the standard
> > devm_gpiod_get_optional(), used devm_gpiod_get_from_of_node() is
> > because it wanted to set up a pretty consumer name for the GPIO,
> 
> IIRC consumer name is not used at all.
> 
> The reason was to specify full name of DTS property, for easier
> identification of the code. DTS property is "reset-gpios" but API
> specify only "reset".

I see. Do you want me to reset the patch with updated desctiption as to
the reason devm_gpiod_get_from_of_node() was used?

> 
> > and we now have a special API for that.
> > 
> > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
> > 
> > diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
> > index 4834198cc86b..4a8a4a8522cb 100644
> > --- a/drivers/pci/controller/pci-aardvark.c
> > +++ b/drivers/pci/controller/pci-aardvark.c
> > @@ -1856,20 +1856,19 @@ static int advk_pcie_probe(struct platform_device *pdev)
> >  		return ret;
> >  	}
> >  
> > -	pcie->reset_gpio = devm_gpiod_get_from_of_node(dev, dev->of_node,
> > -						       "reset-gpios", 0,
> > -						       GPIOD_OUT_LOW,
> > -						       "pcie1-reset");
> > +	pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> >  	ret = PTR_ERR_OR_ZERO(pcie->reset_gpio);
> >  	if (ret) {
> > -		if (ret == -ENOENT) {
> > -			pcie->reset_gpio = NULL;
> > -		} else {
> > -			if (ret != -EPROBE_DEFER)
> > -				dev_err(dev, "Failed to get reset-gpio: %i\n",
> > -					ret);
> > -			return ret;
> > -		}
> > +		if (ret != -EPROBE_DEFER)
> > +			dev_err(dev, "Failed to get reset-gpio: %i\n",
> > +				ret);
> > +		return ret;
> > +	}
> > +
> > +	ret = gpiod_set_consumer_name(pcie->reset_gpio, "pcie1-reset");
> > +	if (ret) {
> > +		dev_err(dev, "Failed to set reset gpio name: %d\n", ret);
> > +		return ret;
> >  	}
> >  
> >  	ret = of_pci_get_max_link_speed(dev->of_node);
> > 
> > -- 
> > b4 0.10.0-dev-fc921

Thanks.

-- 
Dmitry



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux