Re: [PATCH v3] gpio: realtek-otto: switch to 32-bit I/O

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Aug 7, 2022 at 9:21 PM Sander Vanheule <sander@xxxxxxxxxxxxx> wrote:
>
> By using 16-bit I/O on the GPIO peripheral, which is apparently not safe
> on MIPS, the IMR can end up containing garbage. This then results in
> interrupt triggers for lines that don't have an interrupt handler
> associated. The irq_desc lookup fails, and the ISR will not be cleared,
> keeping the CPU busy until reboot, or until another IMR operation
> restores the correct value. This situation appears to happen very
> rarely, for < 0.5% of IMR writes.
>
> Instead of using 8-bit or 16-bit I/O operations on the 32-bit memory
> mapped peripheral registers, switch to using 32-bit I/O only, operating
> on the entire bank for all single bit line settings. For 2-bit line
> settings, with 16-bit port values, stick to manual (un)packing.
>
> This issue has been seen on RTL8382M (HPE 1920-16G), RTL8391M (Netgear
> GS728TP v2), and RTL8393M (D-Link DGS-1210-52 F3, Zyxel GS1900-48).
>
> Reported-by: Luiz Angelo Daros de Luca <luizluca@xxxxxxxxx> # DGS-1210-52
> Reported-by: Birger Koblitz <mail@xxxxxxxxxxxxxxxxx> # GS728TP
> Reported-by: Jan Hoffmann <jan@xxxxxx> # 1920-16G
> Fixes: 0d82fb1127fb ("gpio: Add Realtek Otto GPIO support")
> Signed-off-by: Sander Vanheule <sander@xxxxxxxxxxxxx>
> Cc: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> ---
> Changes since v2:
> Link: https://lore.kernel.org/all/20220724113141.51646-1-sander@xxxxxxxxxxxxx/
>   - Fix off-by-one in initialisation mask size
>   - Add Fixes: tag for original driver commit, since it wasn't working
>     properly
>
> Changes since v1:
> Link: https://lore.kernel.org/all/20220723094957.73880-1-sander@xxxxxxxxxxxxx/
>   - Add tags for issue reporters
>   - Rename {read,write}32() to bank_{read,write}(), to give a better
>     semantic meaning to these functions
>   - Rework IMR handling to also be line-based instead of port-based
>
>  drivers/gpio/gpio-realtek-otto.c | 166 ++++++++++++++++---------------
>  1 file changed, 85 insertions(+), 81 deletions(-)
>
> diff --git a/drivers/gpio/gpio-realtek-otto.c b/drivers/gpio/gpio-realtek-otto.c
> index ea2ae6006c71..b014958c8fdf 100644
> --- a/drivers/gpio/gpio-realtek-otto.c
> +++ b/drivers/gpio/gpio-realtek-otto.c
> @@ -48,10 +48,20 @@
>   * @lock: Lock for accessing the IRQ registers and values
>   * @intr_mask: Mask for interrupts lines
>   * @intr_type: Interrupt type selection
> + * @bank_read: Read a bank setting as a single 32-bit value
> + * @bank_write: Write a bank setting as a single 32-bit value
> + * @imr_line_pos: Bit shift of an IRQ line's IMR value.
> + *
> + * The DIR, DATA, and ISR registers consist of four 8-bit port values, packed
> + * into a single 32-bit register. Use @bank_read (@bank_write) to get (assign)
> + * a value from (to) these registers. The IMR register consists of four 16-bit
> + * port values, packed into two 32-bit registers. Use @imr_line_pos to get the
> + * bit shift of the 2-bit field for a line's IMR settings. Shifts larger than
> + * 32 overflow into the second register.
>   *
>   * Because the interrupt mask register (IMR) combines the function of IRQ type
>   * selection and masking, two extra values are stored. @intr_mask is used to
> - * mask/unmask the interrupts for a GPIO port, and @intr_type is used to store
> + * mask/unmask the interrupts for a GPIO line, and @intr_type is used to store
>   * the selected interrupt types. The logical AND of these values is written to
>   * IMR on changes.
>   */
> @@ -61,10 +71,11 @@ struct realtek_gpio_ctrl {
>         void __iomem *cpumask_base;
>         struct cpumask cpu_irq_maskable;
>         raw_spinlock_t lock;
> -       u16 intr_mask[REALTEK_GPIO_PORTS_PER_BANK];
> -       u16 intr_type[REALTEK_GPIO_PORTS_PER_BANK];
> -       unsigned int (*port_offset_u8)(unsigned int port);
> -       unsigned int (*port_offset_u16)(unsigned int port);
> +       u8 intr_mask[REALTEK_GPIO_MAX];
> +       u8 intr_type[REALTEK_GPIO_MAX];
> +       u32 (*bank_read)(void __iomem *reg);
> +       void (*bank_write)(void __iomem *reg, u32 value);
> +       unsigned int (*line_imr_pos)(unsigned int line);
>  };
>
>  /* Expand with more flags as devices with other quirks are added */
> @@ -103,14 +114,22 @@ static struct realtek_gpio_ctrl *irq_data_to_ctrl(struct irq_data *data)
>   * port. The two interrupt mask registers store two bits per GPIO, so use u16
>   * values.
>   */
> -static unsigned int realtek_gpio_port_offset_u8(unsigned int port)
> +static u32 realtek_gpio_bank_read_swapped(void __iomem *reg)
>  {
> -       return port;
> +       return ioread32be(reg);
>  }
>
> -static unsigned int realtek_gpio_port_offset_u16(unsigned int port)
> +static void realtek_gpio_bank_write_swapped(void __iomem *reg, u32 value)
>  {
> -       return 2 * port;
> +       iowrite32be(value, reg);
> +}
> +
> +static unsigned int realtek_gpio_line_imr_pos_swapped(unsigned int line)
> +{
> +       unsigned int port_pin = line % 8;
> +       unsigned int port = line / 8;
> +
> +       return 2 * (8 * (port ^ 1) + port_pin);
>  }
>
>  /*
> @@ -121,66 +140,67 @@ static unsigned int realtek_gpio_port_offset_u16(unsigned int port)
>   * per GPIO, so use u16 values. The first register contains ports 1 and 0, the
>   * second ports 3 and 2.
>   */
> -static unsigned int realtek_gpio_port_offset_u8_rev(unsigned int port)
> +static u32 realtek_gpio_bank_read(void __iomem *reg)
>  {
> -       return 3 - port;
> +       return ioread32(reg);
>  }
>
> -static unsigned int realtek_gpio_port_offset_u16_rev(unsigned int port)
> +static void realtek_gpio_bank_write(void __iomem *reg, u32 value)
>  {
> -       return 2 * (port ^ 1);
> +       iowrite32(value, reg);
>  }
>
> -static void realtek_gpio_write_imr(struct realtek_gpio_ctrl *ctrl,
> -       unsigned int port, u16 irq_type, u16 irq_mask)
> +static unsigned int realtek_gpio_line_imr_pos(unsigned int line)
>  {
> -       iowrite16(irq_type & irq_mask,
> -               ctrl->base + REALTEK_GPIO_REG_IMR + ctrl->port_offset_u16(port));
> +       return 2 * line;
>  }
>
> -static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl,
> -       unsigned int port, u8 mask)
> +static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl, u32 mask)
>  {
> -       iowrite8(mask, ctrl->base + REALTEK_GPIO_REG_ISR + ctrl->port_offset_u8(port));
> +       ctrl->bank_write(ctrl->base + REALTEK_GPIO_REG_ISR, mask);
>  }
>
> -static u8 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl, unsigned int port)
> +static u32 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl)
>  {
> -       return ioread8(ctrl->base + REALTEK_GPIO_REG_ISR + ctrl->port_offset_u8(port));
> +       return ctrl->bank_read(ctrl->base + REALTEK_GPIO_REG_ISR);
>  }
>
> -/* Set the rising and falling edge mask bits for a GPIO port pin */
> -static u16 realtek_gpio_imr_bits(unsigned int pin, u16 value)
> +/* Set the rising and falling edge mask bits for a GPIO pin */
> +static void realtek_gpio_update_line_imr(struct realtek_gpio_ctrl *ctrl, unsigned int line)
>  {
> -       return (value & REALTEK_GPIO_IMR_LINE_MASK) << 2 * pin;
> +       void __iomem *reg = ctrl->base + REALTEK_GPIO_REG_IMR;
> +       unsigned int line_shift = ctrl->line_imr_pos(line);
> +       unsigned int shift = line_shift % 32;
> +       u32 irq_type = ctrl->intr_type[line];
> +       u32 irq_mask = ctrl->intr_mask[line];
> +       u32 reg_val;
> +
> +       reg += 4 * (line_shift / 32);
> +       reg_val = ioread32(reg);
> +       reg_val &= ~(REALTEK_GPIO_IMR_LINE_MASK << shift);
> +       reg_val |= (irq_type & irq_mask & REALTEK_GPIO_IMR_LINE_MASK) << shift;
> +       iowrite32(reg_val, reg);
>  }
>
>  static void realtek_gpio_irq_ack(struct irq_data *data)
>  {
>         struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
>         irq_hw_number_t line = irqd_to_hwirq(data);
> -       unsigned int port = line / 8;
> -       unsigned int port_pin = line % 8;
>
> -       realtek_gpio_clear_isr(ctrl, port, BIT(port_pin));
> +       realtek_gpio_clear_isr(ctrl, BIT(line));
>  }
>
>  static void realtek_gpio_irq_unmask(struct irq_data *data)
>  {
>         struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
>         unsigned int line = irqd_to_hwirq(data);
> -       unsigned int port = line / 8;
> -       unsigned int port_pin = line % 8;
>         unsigned long flags;
> -       u16 m;
>
>         gpiochip_enable_irq(&ctrl->gc, line);
>
>         raw_spin_lock_irqsave(&ctrl->lock, flags);
> -       m = ctrl->intr_mask[port];
> -       m |= realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
> -       ctrl->intr_mask[port] = m;
> -       realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m);
> +       ctrl->intr_mask[line] = REALTEK_GPIO_IMR_LINE_MASK;
> +       realtek_gpio_update_line_imr(ctrl, line);
>         raw_spin_unlock_irqrestore(&ctrl->lock, flags);
>  }
>
> @@ -188,16 +208,11 @@ static void realtek_gpio_irq_mask(struct irq_data *data)
>  {
>         struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
>         unsigned int line = irqd_to_hwirq(data);
> -       unsigned int port = line / 8;
> -       unsigned int port_pin = line % 8;
>         unsigned long flags;
> -       u16 m;
>
>         raw_spin_lock_irqsave(&ctrl->lock, flags);
> -       m = ctrl->intr_mask[port];
> -       m &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
> -       ctrl->intr_mask[port] = m;
> -       realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m);
> +       ctrl->intr_mask[line] = 0;
> +       realtek_gpio_update_line_imr(ctrl, line);
>         raw_spin_unlock_irqrestore(&ctrl->lock, flags);
>
>         gpiochip_disable_irq(&ctrl->gc, line);
> @@ -207,10 +222,8 @@ static int realtek_gpio_irq_set_type(struct irq_data *data, unsigned int flow_ty
>  {
>         struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
>         unsigned int line = irqd_to_hwirq(data);
> -       unsigned int port = line / 8;
> -       unsigned int port_pin = line % 8;
>         unsigned long flags;
> -       u16 type, t;
> +       u8 type;
>
>         switch (flow_type & IRQ_TYPE_SENSE_MASK) {
>         case IRQ_TYPE_EDGE_FALLING:
> @@ -229,11 +242,8 @@ static int realtek_gpio_irq_set_type(struct irq_data *data, unsigned int flow_ty
>         irq_set_handler_locked(data, handle_edge_irq);
>
>         raw_spin_lock_irqsave(&ctrl->lock, flags);
> -       t = ctrl->intr_type[port];
> -       t &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
> -       t |= realtek_gpio_imr_bits(port_pin, type);
> -       ctrl->intr_type[port] = t;
> -       realtek_gpio_write_imr(ctrl, port, t, ctrl->intr_mask[port]);
> +       ctrl->intr_type[line] = type;
> +       realtek_gpio_update_line_imr(ctrl, line);
>         raw_spin_unlock_irqrestore(&ctrl->lock, flags);
>
>         return 0;
> @@ -244,28 +254,21 @@ static void realtek_gpio_irq_handler(struct irq_desc *desc)
>         struct gpio_chip *gc = irq_desc_get_handler_data(desc);
>         struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
>         struct irq_chip *irq_chip = irq_desc_get_chip(desc);
> -       unsigned int lines_done;
> -       unsigned int port_pin_count;
>         unsigned long status;
>         int offset;
>
>         chained_irq_enter(irq_chip, desc);
>
> -       for (lines_done = 0; lines_done < gc->ngpio; lines_done += 8) {
> -               status = realtek_gpio_read_isr(ctrl, lines_done / 8);
> -               port_pin_count = min(gc->ngpio - lines_done, 8U);
> -               for_each_set_bit(offset, &status, port_pin_count)
> -                       generic_handle_domain_irq(gc->irq.domain, offset + lines_done);
> -       }
> +       status = realtek_gpio_read_isr(ctrl);
> +       for_each_set_bit(offset, &status, gc->ngpio)
> +               generic_handle_domain_irq(gc->irq.domain, offset);
>
>         chained_irq_exit(irq_chip, desc);
>  }
>
> -static inline void __iomem *realtek_gpio_irq_cpu_mask(struct realtek_gpio_ctrl *ctrl,
> -       unsigned int port, int cpu)
> +static inline void __iomem *realtek_gpio_irq_cpu_mask(struct realtek_gpio_ctrl *ctrl, int cpu)
>  {
> -       return ctrl->cpumask_base + ctrl->port_offset_u8(port) +
> -               REALTEK_GPIO_PORTS_PER_BANK * cpu;
> +       return ctrl->cpumask_base + REALTEK_GPIO_PORTS_PER_BANK * cpu;
>  }
>
>  static int realtek_gpio_irq_set_affinity(struct irq_data *data,
> @@ -273,12 +276,10 @@ static int realtek_gpio_irq_set_affinity(struct irq_data *data,
>  {
>         struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
>         unsigned int line = irqd_to_hwirq(data);
> -       unsigned int port = line / 8;
> -       unsigned int port_pin = line % 8;
>         void __iomem *irq_cpu_mask;
>         unsigned long flags;
>         int cpu;
> -       u8 v;
> +       u32 v;
>
>         if (!ctrl->cpumask_base)
>                 return -ENXIO;
> @@ -286,15 +287,15 @@ static int realtek_gpio_irq_set_affinity(struct irq_data *data,
>         raw_spin_lock_irqsave(&ctrl->lock, flags);
>
>         for_each_cpu(cpu, &ctrl->cpu_irq_maskable) {
> -               irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, port, cpu);
> -               v = ioread8(irq_cpu_mask);
> +               irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, cpu);
> +               v = ctrl->bank_read(irq_cpu_mask);
>
>                 if (cpumask_test_cpu(cpu, dest))
> -                       v |= BIT(port_pin);
> +                       v |= BIT(line);
>                 else
> -                       v &= ~BIT(port_pin);
> +                       v &= ~BIT(line);
>
> -               iowrite8(v, irq_cpu_mask);
> +               ctrl->bank_write(irq_cpu_mask, v);
>         }
>
>         raw_spin_unlock_irqrestore(&ctrl->lock, flags);
> @@ -307,16 +308,17 @@ static int realtek_gpio_irq_set_affinity(struct irq_data *data,
>  static int realtek_gpio_irq_init(struct gpio_chip *gc)
>  {
>         struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
> -       unsigned int port;
> +       u32 mask_all = GENMASK(gc->ngpio - 1, 0);
> +       unsigned int line;
>         int cpu;
>
> -       for (port = 0; (port * 8) < gc->ngpio; port++) {
> -               realtek_gpio_write_imr(ctrl, port, 0, 0);
> -               realtek_gpio_clear_isr(ctrl, port, GENMASK(7, 0));
> +       for (line = 0; line < gc->ngpio; line++)
> +               realtek_gpio_update_line_imr(ctrl, line);
>
> -               for_each_cpu(cpu, &ctrl->cpu_irq_maskable)
> -                       iowrite8(GENMASK(7, 0), realtek_gpio_irq_cpu_mask(ctrl, port, cpu));
> -       }
> +       realtek_gpio_clear_isr(ctrl, mask_all);
> +
> +       for_each_cpu(cpu, &ctrl->cpu_irq_maskable)
> +               ctrl->bank_write(realtek_gpio_irq_cpu_mask(ctrl, cpu), mask_all);
>
>         return 0;
>  }
> @@ -387,12 +389,14 @@ static int realtek_gpio_probe(struct platform_device *pdev)
>
>         if (dev_flags & GPIO_PORTS_REVERSED) {
>                 bgpio_flags = 0;
> -               ctrl->port_offset_u8 = realtek_gpio_port_offset_u8_rev;
> -               ctrl->port_offset_u16 = realtek_gpio_port_offset_u16_rev;
> +               ctrl->bank_read = realtek_gpio_bank_read;
> +               ctrl->bank_write = realtek_gpio_bank_write;
> +               ctrl->line_imr_pos = realtek_gpio_line_imr_pos;
>         } else {
>                 bgpio_flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER;
> -               ctrl->port_offset_u8 = realtek_gpio_port_offset_u8;
> -               ctrl->port_offset_u16 = realtek_gpio_port_offset_u16;
> +               ctrl->bank_read = realtek_gpio_bank_read_swapped;
> +               ctrl->bank_write = realtek_gpio_bank_write_swapped;
> +               ctrl->line_imr_pos = realtek_gpio_line_imr_pos_swapped;
>         }
>
>         err = bgpio_init(&ctrl->gc, dev, 4,
> --
> 2.37.1
>

Applied for fixes, thanks!

Bart



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux