On Tue, 2022-08-23 at 13:22 +0200, Greg KH wrote: > > On Thu, Aug 04, 2022 at 10:02:14PM +0530, Kumaravel Thiagarajan wrote: > > pci1xxxx is a PCIe switch with a multi-function endpoint on one of its > > downstream ports. PIO function is one of the functions in the > > multi-function endpoint. PIO function combines a GPIO controller and also > > an interface to program pci1xxxx'x OTP & EEPROM. This patch adds an > > auxiliary bus driver that enumerates separate child devices for gpio and > > OTP/EEPROM interface and the gpio controller driver for the first child. > > > > Kumaravel Thiagarajan (5): > > misc: microchip: pci1xxxx: load auxiliary bus driver for the PIO > > function in the multi-function endpoint of pci1xxxx device. > > misc: microchip: pci1xxxx: load gpio driver for the gpio controller > > auxiliary device enumerated by the auxiliary bus driver. > > misc: microchip: pci1xxxx: Add functions to configure gpio pins as > > input / output, get status, handle I/O for gpio pins. > > misc: microchip: pci1xxxx: Add gpio irq handler and irq helper > > functions irq_ack, irq_mask, irq_unmask and irq_set_type of > > irq_chip. > > misc: microchip: pci1xxxx: Add power management functions - suspend & > > resume handlers. > > > > MAINTAINERS | 9 + > > drivers/misc/Kconfig | 1 + > > drivers/misc/Makefile | 3 +- > > drivers/misc/mchp_pci1xxxx/Kconfig | 10 + > > drivers/misc/mchp_pci1xxxx/Makefile | 1 + > > drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c | 167 +++++++ > > drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.h | 28 ++ > > .../misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c | 438 ++++++++++++++++++ > > 8 files changed, 656 insertions(+), 1 deletion(-) > > create mode 100644 drivers/misc/mchp_pci1xxxx/Kconfig > > create mode 100644 drivers/misc/mchp_pci1xxxx/Makefile > > create mode 100644 drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c > > create mode 100644 drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.h > > create mode 100644 drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c > > > > -- > > 2.25.1 > > > > This patch is marked as "RFC" but I don't see any questions that you > have here. Please resolve anything you think needs to be handled and > submit a "this series is ok to be merged" version. Ok. I will do this. Thank You. Regards, Kumar