The clock is never released after probe(). Use devres to not leak resources. Reported-by: Hulk Robot <hulkci@xxxxxxxxxx> Reported-by: Yuan Can <yuancan@xxxxxxxxxx> Signed-off-by: Bartosz Golaszewski <brgl@xxxxxxxx> --- drivers/gpio/gpio-pxa.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c index c7fbfa3ae43b..1198ab0305d0 100644 --- a/drivers/gpio/gpio-pxa.c +++ b/drivers/gpio/gpio-pxa.c @@ -661,24 +661,17 @@ static int pxa_gpio_probe(struct platform_device *pdev) if (IS_ERR(gpio_reg_base)) return PTR_ERR(gpio_reg_base); - clk = clk_get(&pdev->dev, NULL); + clk = devm_clk_get_enabled(&pdev->dev, NULL); if (IS_ERR(clk)) { dev_err(&pdev->dev, "Error %ld to get gpio clock\n", PTR_ERR(clk)); return PTR_ERR(clk); } - ret = clk_prepare_enable(clk); - if (ret) { - clk_put(clk); - return ret; - } /* Initialize GPIO chips */ ret = pxa_init_gpio_chip(pchip, pxa_last_gpio + 1, gpio_reg_base); - if (ret) { - clk_put(clk); + if (ret) return ret; - } /* clear all GPIO edge detects */ for_each_gpio_bank(gpio, c, pchip) { -- 2.34.1