Re: [PATCH 1/2] gpio: gpio-74x164: add support for CDx4HC4094

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jul 26, 2022 at 8:55 AM Andy Shevchenko
<andy.shevchenko@xxxxxxxxx> wrote:
> On Tue, Jul 26, 2022 at 12:22 AM Linus Walleij <linus.walleij@xxxxxxxxxx> wrote:

> > Well it will work, because all values come out, however *during*
> > the transfer, not *after* the transfer as intended with the
> > STR signal.
>
> No. I think you missed one little but crucial detail. The strobe is
> edge, not level, while you consider CS as a level signal (only).

Aha! Then it works :)

> See Figure 7 and Table 9 in the datasheet you linked to. When STR is
> low, the data is not changed. Maybe it's not clear in this datasheet,
> I found somewhere
> in a more clear table.
>
> > At least how I see it ...?
>
> If what you are saying is true, the hardware is totally broken and I
> wouldn't use it. I.o.w. if the strobe passes all data when it's at low
> level and latches at low-to-high, it's broken by definition in my
> point of view.

I have seen strobes that are level-active in my life, but if you
say this one isn't then all is fine!

Yours,
Linus Walleij



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux