On Sun, Jul 24, 2022 at 7:21 PM Marek Vasut <marex@xxxxxxx> wrote: > > Always configure GPIO pins which are used as interrupt source as INPUTs. > In case the default pin configuration is OUTPUT, or the prior stage does > configure the pins as OUTPUT, then Linux will not reconfigure the pin as > INPUT and no interrupts are received. > > Always configure interrupt source GPIO pin as input to fix the above case. the interrupt ... I'm wondering if it's configured as output (by who?) shouldn't you issue a warning? -- With Best Regards, Andy Shevchenko
Re: [PATCH v3 2/2] gpio: mxc: Always set GPIOs used as interrupt source to INPUT mode
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH v3 2/2] gpio: mxc: Always set GPIOs used as interrupt source to INPUT mode
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Date: Mon, 25 Jul 2022 22:36:18 +0200
- In-reply-to: <20220724171057.18549-2-marex@denx.de>
- References: <20220724171057.18549-1-marex@denx.de> <20220724171057.18549-2-marex@denx.de>
- Follow-Ups:
- References:
- Prev by Date: Re: [PATCH v3 01/10] input: keyboard: adp5588-keys: support gpi key events as 'gpio keys'
- Next by Date: Re: [PATCH v4 1/2] gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock
- Previous by thread: [PATCH v3 2/2] gpio: mxc: Always set GPIOs used as interrupt source to INPUT mode
- Next by thread: Re: [PATCH v3 2/2] gpio: mxc: Always set GPIOs used as interrupt source to INPUT mode
- Index(es):
 |