Re: [RESEND PATCH 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 7/20/22 17:07, William Zhang wrote:
Replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files.

Signed-off-by: William Zhang <william.zhang@xxxxxxxxxxxx>
---

  drivers/i2c/busses/Kconfig            | 4 ++--
  drivers/mtd/parsers/Kconfig           | 6 +++---
  drivers/net/ethernet/broadcom/Kconfig | 4 ++--
  drivers/pci/controller/Kconfig        | 2 +-
  drivers/phy/broadcom/Kconfig          | 4 ++--
  drivers/pinctrl/bcm/Kconfig           | 4 ++--
  drivers/reset/Kconfig                 | 2 +-
  drivers/soc/bcm/bcm63xx/Kconfig       | 4 ++--
  drivers/tty/serial/Kconfig            | 4 ++--
  drivers/watchdog/Kconfig              | 2 +-

For watchdog:

Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx>

  10 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 45a4e9f1b639..fd9a4dd01997 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -487,8 +487,8 @@ config I2C_BCM_KONA
config I2C_BRCMSTB
  	tristate "BRCM Settop/DSL I2C controller"
-	depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCMBCA || \
-		   ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
+	depends on ARCH_BCM2835 || ARCH_BCMBCA || ARCH_BRCMSTB || \
+		   BMIPS_GENERIC || COMPILE_TEST
  	default y
  	help
  	  If you say yes to this option, support will be included for the
diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
index b43df73927a0..d6db655a1d24 100644
--- a/drivers/mtd/parsers/Kconfig
+++ b/drivers/mtd/parsers/Kconfig
@@ -69,8 +69,8 @@ config MTD_OF_PARTS
config MTD_OF_PARTS_BCM4908
  	bool "BCM4908 partitioning support"
-	depends on MTD_OF_PARTS && (ARCH_BCM4908 || COMPILE_TEST)
-	default ARCH_BCM4908
+	depends on MTD_OF_PARTS && (ARCH_BCMBCA || COMPILE_TEST)
+	default ARCH_BCMBCA
  	help
  	  This provides partitions parser for BCM4908 family devices
  	  that can have multiple "firmware" partitions. It takes care of
@@ -78,7 +78,7 @@ config MTD_OF_PARTS_BCM4908
config MTD_OF_PARTS_LINKSYS_NS
  	bool "Linksys Northstar partitioning support"
-	depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCM4908 || COMPILE_TEST)
+	depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCMBCA || COMPILE_TEST)
  	default ARCH_BCM_5301X
  	help
  	  This provides partitions parser for Linksys devices based on Broadcom
diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
index 56e0fb07aec7..f4e1ca68d831 100644
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -53,8 +53,8 @@ config B44_PCI
config BCM4908_ENET
  	tristate "Broadcom BCM4908 internal mac support"
-	depends on ARCH_BCM4908 || COMPILE_TEST
-	default y if ARCH_BCM4908
+	depends on ARCH_BCMBCA || COMPILE_TEST
+	default y if ARCH_BCMBCA
  	help
  	  This driver supports Ethernet controller integrated into Broadcom
  	  BCM4908 family SoCs.
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index d1c5fcf00a8a..bfd9bac37e24 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -274,7 +274,7 @@ config VMD
config PCIE_BRCMSTB
  	tristate "Broadcom Brcmstb PCIe host controller"
-	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCM4908 || \
+	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCMBCA || \
  		   BMIPS_GENERIC || COMPILE_TEST
  	depends on OF
  	depends on PCI_MSI_IRQ_DOMAIN
diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index 93a6a8ee4716..1d89a2fd9b79 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -93,11 +93,11 @@ config PHY_BRCM_SATA
config PHY_BRCM_USB
  	tristate "Broadcom STB USB PHY driver"
-	depends on ARCH_BCM4908 || ARCH_BRCMSTB || COMPILE_TEST
+	depends on ARCH_BCMBCA || ARCH_BRCMSTB || COMPILE_TEST
  	depends on OF
  	select GENERIC_PHY
  	select SOC_BRCMSTB if ARCH_BRCMSTB
-	default ARCH_BCM4908 || ARCH_BRCMSTB
+	default ARCH_BCMBCA || ARCH_BRCMSTB
  	help
  	  Enable this to support the Broadcom STB USB PHY.
  	  This driver is required by the USB XHCI, EHCI and OHCI
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index 8f4d89806fcb..35b51ce4298e 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -31,13 +31,13 @@ config PINCTRL_BCM2835
config PINCTRL_BCM4908
  	tristate "Broadcom BCM4908 pinmux driver"
-	depends on OF && (ARCH_BCM4908 || COMPILE_TEST)
+	depends on OF && (ARCH_BCMBCA || COMPILE_TEST)
  	select PINMUX
  	select PINCONF
  	select GENERIC_PINCONF
  	select GENERIC_PINCTRL_GROUPS
  	select GENERIC_PINMUX_FUNCTIONS
-	default ARCH_BCM4908
+	default ARCH_BCMBCA
  	help
  	  Driver for BCM4908 family SoCs with integrated pin controller.
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index f9a7cee01659..7ae71535fe2a 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -201,7 +201,7 @@ config RESET_SCMI
config RESET_SIMPLE
  	bool "Simple Reset Controller Driver" if COMPILE_TEST || EXPERT
-	default ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
+	default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
  	help
  	  This enables a simple reset controller driver for reset lines that
  	  that can be asserted and deasserted by toggling bits in a contiguous,
diff --git a/drivers/soc/bcm/bcm63xx/Kconfig b/drivers/soc/bcm/bcm63xx/Kconfig
index 9e501c8ac5ce..355c34482076 100644
--- a/drivers/soc/bcm/bcm63xx/Kconfig
+++ b/drivers/soc/bcm/bcm63xx/Kconfig
@@ -13,8 +13,8 @@ endif # SOC_BCM63XX
config BCM_PMB
  	bool "Broadcom PMB (Power Management Bus) driver"
-	depends on ARCH_BCM4908 || (COMPILE_TEST && OF)
-	default ARCH_BCM4908
+	depends on ARCH_BCMBCA || (COMPILE_TEST && OF)
+	default ARCH_BCMBCA
  	select PM_GENERIC_DOMAINS if PM
  	help
  	  This enables support for the Broadcom's PMB (Power Management Bus) that
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index e3279544b03c..f32bb01c3feb 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1100,8 +1100,8 @@ config SERIAL_TIMBERDALE
  config SERIAL_BCM63XX
  	tristate "Broadcom BCM63xx/BCM33xx UART support"
  	select SERIAL_CORE
-	depends on ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
-	default ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
+	depends on ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+	default ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
  	help
  	  This enables the driver for the onchip UART core found on
  	  the following chipsets:
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 32fd37698932..1f85ec8a4b3b 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1798,7 +1798,7 @@ config BCM7038_WDT
  	tristate "BCM63xx/BCM7038 Watchdog"
  	select WATCHDOG_CORE
  	depends on HAS_IOMEM
-	depends on ARCH_BCM4908 || ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST
+	depends on ARCH_BCMBCA || ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST
  	help
  	  Watchdog driver for the built-in hardware in Broadcom 7038 and
  	  later SoCs used in set-top boxes.  BCM7038 was made public




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux