On Wed, Jul 13, 2022 at 03:14:20PM +0200, Nuno Sá wrote: > On top of looking at PULL_UP and PULL_DOWN flags, also look at > PULL_DISABLE and set the appropriate GPIO flag. The GPIO core will then > pass down this to controllers that support it. In case this patch will be in v2, Acked-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> P.S. I will be on vacation till mid-August. -- With Best Regards, Andy Shevchenko
Re: [PATCH 3/4] gpiolib: acpi: support bias pull disable
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH 3/4] gpiolib: acpi: support bias pull disable
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Date: Mon, 18 Jul 2022 21:25:37 +0300
- In-reply-to: <20220713131421.1527179-4-nuno.sa@analog.com>
- Organization: Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo
- References: <20220713131421.1527179-1-nuno.sa@analog.com> <20220713131421.1527179-4-nuno.sa@analog.com>
- References:
- [PATCH 0/4] add support for bias pull-disable
- From: Nuno Sá
- [PATCH 3/4] gpiolib: acpi: support bias pull disable
- From: Nuno Sá
- [PATCH 0/4] add support for bias pull-disable
- Prev by Date: Re: [PATCH v13 net-next 9/9] mfd: ocelot: add support for the vsc7512 chip via spi
- Next by Date: Is a multiplexer using latches a gpio controller?
- Previous by thread: Re: [PATCH 3/4] gpiolib: acpi: support bias pull disable
- Next by thread: Re: [PATCH 0/4] add support for bias pull-disable
- Index(es):
 |