Re: [PATCH 2/2] pinctrl: ocelot: fix pinconf

[Robert Marko <robert.marko@xxxxxxxxxx>]

On Thu, Jul 14, 2022 at 1:01 AM Colin Foster
<colin.foster@xxxxxxxxxxxxxxxx> wrote:
>
> Hi Robert,
>
> On Thu, Jul 14, 2022 at 12:51:51AM +0200, Robert Marko wrote:
> > Commit "pinctrl: ocelot: convert pinctrl to regmap" moved to using
> > regmap_read/write, however it neglected to also carry out alignment
> > to register stride of 4.
> >
> > This would cause the following error:
> > [    1.720873] pinctrl-ocelot 6110101e0.pinctrl: pin_config_set op failed for pin 34
> > [    1.728110] sdhci-sparx5 600800000.mmc: Error applying setting, reverse things back
> >
> > So, regmap_read would return -EINVAL as it was being passed address
> > of the pin without stride, so for example pin 34 would end up being
> > 0x22 in hex.
> >
> > Fix this by accouting for the stride in register address.
>
> Sorry for the bug. Horaitu found this as well and recently submitted
> patches:
>
> https://patchwork.ozlabs.org/project/linux-gpio/patch/20220713193750.4079621-3-horatiu.vultur@xxxxxxxxxxxxx/
>
> The second patch in his set fixes both of these issues (reg_stride and
> max_register).

Yeah, I noticed his patch only after sending this.
Sorry for the noise.

Regards,
Robert
>
> >
> > Fixes: 076d9e71bcf8 ("pinctrl: ocelot: convert pinctrl to regmap")
> > Signed-off-by: Robert Marko <robert.marko@xxxxxxxxxx>
> > ---
> >  drivers/pinctrl/pinctrl-ocelot.c | 12 +++++++++---
> >  1 file changed, 9 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c
> > index 84bfbe649b67..a71145367b15 100644
> > --- a/drivers/pinctrl/pinctrl-ocelot.c
> > +++ b/drivers/pinctrl/pinctrl-ocelot.c
> > @@ -1327,7 +1327,9 @@ static int ocelot_hw_get_value(struct ocelot_pinctrl *info,
> >       if (info->pincfg) {
> >               u32 regcfg;
> >
> > -             ret = regmap_read(info->pincfg, pin, &regcfg);
> > +             ret = regmap_read(info->pincfg,
> > +                               pin * regmap_get_reg_stride(info->pincfg),
> > +                               &regcfg);
> >               if (ret)
> >                       return ret;
> >
> > @@ -1359,14 +1361,18 @@ static int ocelot_pincfg_clrsetbits(struct ocelot_pinctrl *info, u32 regaddr,
> >       u32 val;
> >       int ret;
> >
> > -     ret = regmap_read(info->pincfg, regaddr, &val);
> > +     ret = regmap_read(info->pincfg,
> > +                       regaddr * regmap_get_reg_stride(info->pincfg),
> > +                       &val);
> >       if (ret)
> >               return ret;
> >
> >       val &= ~clrbits;
> >       val |= setbits;
> >
> > -     ret = regmap_write(info->pincfg, regaddr, val);
> > +     ret = regmap_write(info->pincfg,
> > +                        regaddr * regmap_get_reg_stride(info->pincfg),
> > +                        val);
> >
> >       return ret;
> >  }
> > --
> > 2.36.1
> >



-- 
Robert Marko
Staff Embedded Linux Engineer
Sartura Ltd.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.marko@xxxxxxxxxx
Web: www.sartura.hr