Re: [PATCH v6 10/12] iio: adc: qcom-spmi-adc5: add ADC5_VREF_VADC to rev2 ADC5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon,  4 Jul 2022 23:24:00 +0200
Robert Marko <robimarko@xxxxxxxxx> wrote:

> Add support for ADC5_VREF_VADC channel to rev2 ADC5 channel list.
> This channel measures the VADC reference LDO output.
> 
> Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
Acked-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>

I'm assuming this will go in via MFD. Shout if I should pick it up
directly.

Thanks,

Jonathan

> ---
>  drivers/iio/adc/qcom-spmi-adc5.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
> index 87438d1e5c0b..7bd3745884f0 100644
> --- a/drivers/iio/adc/qcom-spmi-adc5.c
> +++ b/drivers/iio/adc/qcom-spmi-adc5.c
> @@ -589,6 +589,8 @@ static const struct adc5_channels adc5_chans_rev2[ADC5_MAX_CHANNEL] = {
>  					SCALE_HW_CALIB_DEFAULT)
>  	[ADC5_1P25VREF]		= ADC5_CHAN_VOLT("vref_1p25", 0,
>  					SCALE_HW_CALIB_DEFAULT)
> +	[ADC5_VREF_VADC]	= ADC5_CHAN_VOLT("vref_vadc", 0,
> +					SCALE_HW_CALIB_DEFAULT)
>  	[ADC5_VPH_PWR]		= ADC5_CHAN_VOLT("vph_pwr", 1,
>  					SCALE_HW_CALIB_DEFAULT)
>  	[ADC5_VBAT_SNS]		= ADC5_CHAN_VOLT("vbat_sns", 1,




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux