Re: [PATCH v4 09/15] iio: adc: axp20x_adc: Replace adc_en2 flag with adc_en2_mask field

[Jonathan Cameron <jic23@xxxxxxxxxx>]

On Wed, 29 Jun 2022 15:30:40 +0100
Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx> wrote:

> The adc_en2 flag is essentially specific to axp20x-compatible devices
> because it hardcodes register values. Replace it with a mask field
> so the register value can be specified in device match data.
> 
> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>

> ---
>  drivers/iio/adc/axp20x_adc.c | 16 +++++++---------
>  1 file changed, 7 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c
> index ab25e6e1ff65..75bda94dbce1 100644
> --- a/drivers/iio/adc/axp20x_adc.c
> +++ b/drivers/iio/adc/axp20x_adc.c
> @@ -623,9 +623,9 @@ struct axp_data {
>  	int				num_channels;
>  	struct iio_chan_spec const	*channels;
>  	unsigned long			adc_en1_mask;
> +	unsigned long			adc_en2_mask;
>  	int				(*adc_rate)(struct axp20x_adc_iio *info,
>  						    int rate);
> -	bool				adc_en2;
>  	struct iio_map			*maps;
>  };
>  
> @@ -634,8 +634,8 @@ static const struct axp_data axp20x_data = {
>  	.num_channels = ARRAY_SIZE(axp20x_adc_channels),
>  	.channels = axp20x_adc_channels,
>  	.adc_en1_mask = AXP20X_ADC_EN1_MASK,
> +	.adc_en2_mask = AXP20X_ADC_EN2_MASK,
>  	.adc_rate = axp20x_adc_rate,
> -	.adc_en2 = true,
>  	.maps = axp20x_maps,
>  };
>  
> @@ -645,7 +645,6 @@ static const struct axp_data axp22x_data = {
>  	.channels = axp22x_adc_channels,
>  	.adc_en1_mask = AXP22X_ADC_EN1_MASK,
>  	.adc_rate = axp22x_adc_rate,
> -	.adc_en2 = false,
>  	.maps = axp22x_maps,
>  };
>  
> @@ -655,7 +654,6 @@ static const struct axp_data axp813_data = {
>  	.channels = axp813_adc_channels,
>  	.adc_en1_mask = AXP22X_ADC_EN1_MASK,
>  	.adc_rate = axp813_adc_rate,
> -	.adc_en2 = false,
>  	.maps = axp22x_maps,
>  };
>  
> @@ -713,10 +711,10 @@ static int axp20x_probe(struct platform_device *pdev)
>  	/* Enable the ADCs on IP */
>  	regmap_write(info->regmap, AXP20X_ADC_EN1, info->data->adc_en1_mask);
>  
> -	if (info->data->adc_en2)
> -		/* Enable GPIO0/1 and internal temperature ADCs */
> +	if (info->data->adc_en2_mask)
>  		regmap_update_bits(info->regmap, AXP20X_ADC_EN2,
> -				   AXP20X_ADC_EN2_MASK, AXP20X_ADC_EN2_MASK);
> +				   info->data->adc_en2_mask,
> +				   info->data->adc_en2_mask);
>  
>  	/* Configure ADCs rate */
>  	info->data->adc_rate(info, 100);
> @@ -741,7 +739,7 @@ static int axp20x_probe(struct platform_device *pdev)
>  fail_map:
>  	regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
>  
> -	if (info->data->adc_en2)
> +	if (info->data->adc_en2_mask)
>  		regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
>  
>  	return ret;
> @@ -757,7 +755,7 @@ static int axp20x_remove(struct platform_device *pdev)
>  
>  	regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
>  
> -	if (info->data->adc_en2)
> +	if (info->data->adc_en2_mask)
>  		regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
>  
>  	return 0;