Re: [PATCH V2 7/8] arm64: dts: Add ipq5018 SoC and MP03 board support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 28.06.2022 09:14, Sricharan Ramabadhran wrote:
> Thanks Konrad for the review.
> 
> On 6/27/2022 12:02 AM, Konrad Dybcio wrote:
>>
>> On 21.06.2022 18:11, Sricharan R wrote:
>>> From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
>>>
>>> Add initial device tree support for the Qualcomm IPQ5018 SoC and
>>> MP03.1-C2 board.
>>>
>>> Co-developed-by: Sricharan R <quic_srichara@xxxxxxxxxxx>
>>> Signed-off-by: Sricharan R <quic_srichara@xxxxxxxxxxx>
>>> Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
>>> ---
>>>   arch/arm64/boot/dts/qcom/Makefile             |   1 +
>>>   .../arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts |  29 +++
>>>   arch/arm64/boot/dts/qcom/ipq5018.dtsi         | 221 ++++++++++++++++++
>>>   3 files changed, 251 insertions(+)
>>>   create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts
>>>   create mode 100644 arch/arm64/boot/dts/qcom/ipq5018.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>>> index f9e6343acd03..c44e701f093c 100644
>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>> @@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_QCOM)    += ipq8074-hk10-c2.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)    += msm8916-alcatel-idol347.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)    += msm8916-asus-z00l.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)    += msm8916-huawei-g7.dtb
>>> +dtb-$(CONFIG_ARCH_QCOM)    += ipq5018-mp03.1-c2.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)    += msm8916-longcheer-l8150.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)    += msm8916-longcheer-l8910.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)    += msm8916-mtp.dtb
>>> diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts
>>> new file mode 100644
>>> index 000000000000..d1cd080ec3db
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts
>>> @@ -0,0 +1,29 @@
>>> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
>>> +/*
>>> + * IPQ5018 CP01 board device tree source
>>> + *
>>> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include "ipq5018.dtsi"
>>> +
>>> +/ {
>>> +    model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03-C2";
>>> +    compatible = "qcom,ipq5018-mp03", "qcom,ipq5018";
>>> +
>>> +    aliases {
>>> +        serial0 = &blsp1_uart1;
>>> +    };
>>> +
>>> +    chosen {
>>> +        stdout-path = "serial0:115200n8";
>>> +    };
>>> +};
>>> +
>>> +&blsp1_uart1 {
>>> +    pinctrl-0 = <&serial_1_pins>;
>>> +    pinctrl-names = "default";
>>> +    status = "ok";
>>> +};
>>> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
>>> new file mode 100644
>>> index 000000000000..084fb7b30dfd
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
>>> @@ -0,0 +1,221 @@
>>> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
>>> +/*
>>> + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved.
>>> + */
>>> +/*
>>> + * IPQ5018 SoC device tree source
>>> + *
>>> + * Copyright (c) 2019, The Linux Foundation. All rights reserved.
>>> + */
>>> +
>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +#include <dt-bindings/clock/qcom,gcc-ipq5018.h>
>>> +#include <dt-bindings/reset/qcom,gcc-ipq5018.h>
>>> +
>>> +/ {
>>> +    #address-cells = <2>;
>>> +    #size-cells = <2>;
>>> +    interrupt-parent = <&intc>;
>> Hi!
>>
>> interrupt-parent could go first.
> 
>  ok.
> 
> 
>>> +
>>> +    sleep_clk: sleep-clk {
>>> +        compatible = "fixed-clock";
>>> +        clock-frequency = <32000>;
>>> +        #clock-cells = <0>;
>>> +    };
>>> +
>>> +    xo: xo {
>>> +        compatible = "fixed-clock";
>>> +        clock-frequency = <24000000>;
>>> +        #clock-cells = <0>;
>>> +    };
>>> +
>>> +    gen2clk0: gen2clk0 {
>>> +        compatible = "fixed-clock";
>>> +        #clock-cells = <0>;
>>> +        clock-frequency = <125000000>;
>>> +        clock-output-names = "pcie20_phy0_pipe_clk";
>>> +    };
>>> +
>>> +    gen2clk1: gen2clk1 {
>>> +        compatible = "fixed-clock";
>>> +        #clock-cells = <0>;
>>> +        clock-frequency = <125000000>;
>>> +        clock-output-names = "pcie20_phy1_pipe_clk";
>>> +    };
>> I am not sure what's the current stance on this, but previously clock nodes
>> used to be wrapped in a clocks {} node, as currently they are not sorted
>> properly.
>>
>  hmm ok, yeah, see the clocks { node in some recent dts as well, will add the wrapper.
> 
> 
>>> +
>>> +    cpus: cpus {
>> Is this label going to be used?
>   hmm, not used, will remove.
>>> +        #address-cells = <1>;
>>> +        #size-cells = <0>;
>>> +
>>> +        CPU0: cpu@0 {
>>> +            device_type = "cpu";
>>> +            compatible = "arm,cortex-a53";
>>> +            reg = <0x0>;
>>> +            enable-method = "psci";
>>> +            next-level-cache = <&L2_0>;
>>> +        };
>>> +
>>> +        CPU1: cpu@1 {
>>> +            device_type = "cpu";
>>> +            compatible = "arm,cortex-a53";
>>> +            enable-method = "psci";
>>> +            reg = <0x1>;
>>> +            next-level-cache = <&L2_0>;
>>> +        };
>>> +
>>> +        L2_0: l2-cache {
>>> +            compatible = "cache";
>>> +            cache-level = <0x2>;
>> This should probably be dec, as it's not a register.
> 
>    'dec' ? Sorry, i did not get that.
Short for decimal.

Konrad

[snip]



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux