Re: [PATCH v4 08/15] iio: adc: axp20x_adc: Minor code cleanups

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 

On Wed, Jun 29, 2022 at 4:30 PM Aidan MacDonald
<aidanmacdonald.0x0@xxxxxxxxx> wrote:
>
> The code may be clearer if parameters are not re-purposed to hold
> temporary results like register values, so introduce local variables
> as necessary to avoid that. Regroup macros based on chip type, and
> use the FIELD_PREP() macro instead of a hand-rolled version.

Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>

> Suggested-by: Jonathan Cameron <jic23@xxxxxxxxxx>
> Reviewed-by: Chen-Yu Tsai <wens@xxxxxxxx>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
> ---
>  drivers/iio/adc/axp20x_adc.c | 61 +++++++++++++++++++-----------------
>  1 file changed, 32 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c
> index 53bf7d4899d2..ab25e6e1ff65 100644
> --- a/drivers/iio/adc/axp20x_adc.c
> +++ b/drivers/iio/adc/axp20x_adc.c
> @@ -5,6 +5,7 @@
>   *     Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
>   */
>
> +#include <linux/bitfield.h>
>  #include <linux/completion.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
> @@ -22,20 +23,20 @@
>  #include <linux/mfd/axp20x.h>
>
>  #define AXP20X_ADC_EN1_MASK                    GENMASK(7, 0)
> -
>  #define AXP20X_ADC_EN2_MASK                    (GENMASK(3, 2) | BIT(7))
> +
>  #define AXP22X_ADC_EN1_MASK                    (GENMASK(7, 5) | BIT(0))
>
>  #define AXP20X_GPIO10_IN_RANGE_GPIO0           BIT(0)
>  #define AXP20X_GPIO10_IN_RANGE_GPIO1           BIT(1)
> -#define AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(x)    ((x) & BIT(0))
> -#define AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(x)    (((x) & BIT(0)) << 1)
>
>  #define AXP20X_ADC_RATE_MASK                   GENMASK(7, 6)
> -#define AXP813_V_I_ADC_RATE_MASK               GENMASK(5, 4)
> -#define AXP813_ADC_RATE_MASK                   (AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK)
>  #define AXP20X_ADC_RATE_HZ(x)                  ((ilog2((x) / 25) << 6) & AXP20X_ADC_RATE_MASK)
> +
>  #define AXP22X_ADC_RATE_HZ(x)                  ((ilog2((x) / 100) << 6) & AXP20X_ADC_RATE_MASK)
> +
> +#define AXP813_V_I_ADC_RATE_MASK               GENMASK(5, 4)
> +#define AXP813_ADC_RATE_MASK                   (AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK)
>  #define AXP813_TS_GPIO0_ADC_RATE_HZ(x)         AXP20X_ADC_RATE_HZ(x)
>  #define AXP813_V_I_ADC_RATE_HZ(x)              ((ilog2((x) / 100) << 4) & AXP813_V_I_ADC_RATE_MASK)
>  #define AXP813_ADC_RATE_HZ(x)                  (AXP20X_ADC_RATE_HZ(x) | AXP813_V_I_ADC_RATE_HZ(x))
> @@ -234,7 +235,7 @@ static int axp20x_adc_raw(struct iio_dev *indio_dev,
>                           struct iio_chan_spec const *chan, int *val)
>  {
>         struct axp20x_adc_iio *info = iio_priv(indio_dev);
> -       int size = 12;
> +       int ret, size;
>
>         /*
>          * N.B.:  Unlike the Chinese datasheets tell, the charging current is
> @@ -246,10 +247,11 @@ static int axp20x_adc_raw(struct iio_dev *indio_dev,
>         else
>                 size = 12;
>
> -       *val = axp20x_read_variable_width(info->regmap, chan->address, size);
> -       if (*val < 0)
> -               return *val;
> +       ret = axp20x_read_variable_width(info->regmap, chan->address, size);
> +       if (ret < 0)
> +               return ret;
>
> +       *val = ret;
>         return IIO_VAL_INT;
>  }
>
> @@ -257,11 +259,13 @@ static int axp22x_adc_raw(struct iio_dev *indio_dev,
>                           struct iio_chan_spec const *chan, int *val)
>  {
>         struct axp20x_adc_iio *info = iio_priv(indio_dev);
> +       int ret;
>
> -       *val = axp20x_read_variable_width(info->regmap, chan->address, 12);
> -       if (*val < 0)
> -               return *val;
> +       ret = axp20x_read_variable_width(info->regmap, chan->address, 12);
> +       if (ret < 0)
> +               return ret;
>
> +       *val = ret;
>         return IIO_VAL_INT;
>  }
>
> @@ -269,11 +273,13 @@ static int axp813_adc_raw(struct iio_dev *indio_dev,
>                           struct iio_chan_spec const *chan, int *val)
>  {
>         struct axp20x_adc_iio *info = iio_priv(indio_dev);
> +       int ret;
>
> -       *val = axp20x_read_variable_width(info->regmap, chan->address, 12);
> -       if (*val < 0)
> -               return *val;
> +       ret = axp20x_read_variable_width(info->regmap, chan->address, 12);
> +       if (ret < 0)
> +               return ret;
>
> +       *val = ret;
>         return IIO_VAL_INT;
>  }
>
> @@ -443,27 +449,27 @@ static int axp20x_adc_offset_voltage(struct iio_dev *indio_dev, int channel,
>                                      int *val)
>  {
>         struct axp20x_adc_iio *info = iio_priv(indio_dev);
> +       unsigned int regval;
>         int ret;
>
> -       ret = regmap_read(info->regmap, AXP20X_GPIO10_IN_RANGE, val);
> +       ret = regmap_read(info->regmap, AXP20X_GPIO10_IN_RANGE, &regval);
>         if (ret < 0)
>                 return ret;
>
>         switch (channel) {
>         case AXP20X_GPIO0_V:
> -               *val &= AXP20X_GPIO10_IN_RANGE_GPIO0;
> +               regval = FIELD_GET(AXP20X_GPIO10_IN_RANGE_GPIO0, regval);
>                 break;
>
>         case AXP20X_GPIO1_V:
> -               *val &= AXP20X_GPIO10_IN_RANGE_GPIO1;
> +               regval = FIELD_GET(AXP20X_GPIO10_IN_RANGE_GPIO1, regval);
>                 break;
>
>         default:
>                 return -EINVAL;
>         }
>
> -       *val = *val ? 700000 : 0;
> -
> +       *val = regval ? 700000 : 0;
>         return IIO_VAL_INT;
>  }
>
> @@ -548,7 +554,7 @@ static int axp20x_write_raw(struct iio_dev *indio_dev,
>                             long mask)
>  {
>         struct axp20x_adc_iio *info = iio_priv(indio_dev);
> -       unsigned int reg, regval;
> +       unsigned int regmask, regval;
>
>         /*
>          * The AXP20X PMIC allows the user to choose between 0V and 0.7V offsets
> @@ -560,25 +566,22 @@ static int axp20x_write_raw(struct iio_dev *indio_dev,
>         if (val != 0 && val != 700000)
>                 return -EINVAL;
>
> -       val = val ? 1 : 0;
> -
>         switch (chan->channel) {
>         case AXP20X_GPIO0_V:
> -               reg = AXP20X_GPIO10_IN_RANGE_GPIO0;
> -               regval = AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(val);
> +               regmask = AXP20X_GPIO10_IN_RANGE_GPIO0;
> +               regval = FIELD_PREP(AXP20X_GPIO10_IN_RANGE_GPIO0, !!val);
>                 break;
>
>         case AXP20X_GPIO1_V:
> -               reg = AXP20X_GPIO10_IN_RANGE_GPIO1;
> -               regval = AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(val);
> +               regmask = AXP20X_GPIO10_IN_RANGE_GPIO1;
> +               regval = FIELD_PREP(AXP20X_GPIO10_IN_RANGE_GPIO1, !!val);
>                 break;
>
>         default:
>                 return -EINVAL;
>         }
>
> -       return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE, reg,
> -                                 regval);
> +       return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE, regmask, regval);
>  }
>
>  static const struct iio_info axp20x_adc_iio_info = {
> --
> 2.35.1
>


-- 
With Best Regards,
Andy Shevchenko
[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux