Re: [PATCH v4 08/13] clk: imx: Update pllv3 to support i.MXRT1170

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22-06-27 12:11:31, Jesse Taube wrote:
>
>
> On 6/27/22 09:32, Abel Vesa wrote:
> > On 22-06-26 02:45:18, Jesse Taube wrote:
> > > The i.MXRT1170 has a pll that has the multiplier bits inverted and
> > > cannot be changed add IMX_PLLV3_GENERICV2.
> > >
> > > The i.MXRT1170 also has the lock bit moved as well as the
> > > power bit inverted the power bit also is in different locations on each
> > > pll control register.
> > >
> > > Signed-off-by: Jesse Taube <Mr.Bossman075@xxxxxxxxx>
> > > ---
> > > V1 -> V2:
> > >   - Nothing done
> > > V2 -> V3:
> > >   - Nothing done
> > > V3 -> V4:
> > >   - Nothing done
> > > ---
> > >   drivers/clk/imx/clk-pllv3.c | 57 +++++++++++++++++++++++++++++++++++--
> > >   drivers/clk/imx/clk.h       |  4 +++
> > >   2 files changed, 59 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c
> > > index eea32f87c60a..740412ea2f7e 100644
> > > --- a/drivers/clk/imx/clk-pllv3.c
> > > +++ b/drivers/clk/imx/clk-pllv3.c
> > > @@ -23,6 +23,7 @@
> > >
> > >   #define BM_PLL_POWER		(0x1 << 12)
> > >   #define BM_PLL_LOCK		(0x1 << 31)
> > > +#define BM_PLL_LOCK_V2		(0x1 << 29)
> > >   #define IMX7_ENET_PLL_POWER	(0x1 << 5)
> > >   #define IMX7_DDR_PLL_POWER	(0x1 << 20)
> > >
> > > @@ -34,6 +35,7 @@
> > >    * @base:	 base address of PLL registers
> > >    * @power_bit:	 pll power bit mask
> > >    * @powerup_set: set power_bit to power up the PLL
> > > + * @lock_bit:	 pll lock bit mask
> > >    * @div_mask:	 mask of divider bits
> > >    * @div_shift:	 shift of divider bits
> > >    * @ref_clock:	reference clock rate
> > > @@ -48,6 +50,7 @@ struct clk_pllv3 {
> > >   	void __iomem	*base;
> > >   	u32		power_bit;
> > >   	bool		powerup_set;
> > > +	u32		lock_bit;
> > >   	u32		div_mask;
> > >   	u32		div_shift;
> > >   	unsigned long	ref_clock;
> > > @@ -65,7 +68,7 @@ static int clk_pllv3_wait_lock(struct clk_pllv3 *pll)
> > >   	if ((pll->powerup_set && !val) || (!pll->powerup_set && val))
> > >   		return 0;
> > >
> > > -	return readl_relaxed_poll_timeout(pll->base, val, val & BM_PLL_LOCK,
> > > +	return readl_relaxed_poll_timeout(pll->base, val, val & pll->lock_bit,
> > >   					  500, PLL_LOCK_TIMEOUT);
> > >   }
> > >
> > > @@ -101,7 +104,7 @@ static int clk_pllv3_is_prepared(struct clk_hw *hw)
> > >   {
> > >   	struct clk_pllv3 *pll = to_clk_pllv3(hw);
> > >
> > > -	if (readl_relaxed(pll->base) & BM_PLL_LOCK)
> > > +	if (readl_relaxed(pll->base) & pll->lock_bit)
> > >   		return 1;
> > >
> > >   	return 0;
> > > @@ -155,6 +158,39 @@ static const struct clk_ops clk_pllv3_ops = {
> > >   	.set_rate	= clk_pllv3_set_rate,
> > >   };
> > >
> > > +static int clk_pllv3_genericv2_set_rate(struct clk_hw *hw, unsigned long rate,
> > > +		unsigned long parent_rate)
> > > +{
> > > +	struct clk_pllv3 *pll = to_clk_pllv3(hw);
> > > +	u32 val, div;
> > > +
> > > +	div = (readl_relaxed(pll->base) >> pll->div_shift) & pll->div_mask;
> > > +	val = (div == 0) ? parent_rate * 22 : parent_rate * 20;
> > > +
> > > +	if (rate == val)
> > > +		return 0;
> > > +
> > > +	return -EINVAL;
> > > +}
> > > +
> > > +static unsigned long clk_pllv3_genericv2_recalc_rate(struct clk_hw *hw,
> > > +					   unsigned long parent_rate)
> > > +{
> > > +	struct clk_pllv3 *pll = to_clk_pllv3(hw);
> > > +	u32 div = (readl_relaxed(pll->base) >> pll->div_shift)  & pll->div_mask;
> > > +
> > > +	return (div == 0) ? parent_rate * 22 : parent_rate * 20;
> > > +}
> > > +
> > > +static const struct clk_ops clk_pllv3_genericv2_ops = {
> > > +	.prepare	= clk_pllv3_prepare,
> > > +	.unprepare	= clk_pllv3_unprepare,
> > > +	.is_prepared	= clk_pllv3_is_prepared,
> > > +	.recalc_rate	= clk_pllv3_genericv2_recalc_rate,
> > > +	.round_rate	= clk_pllv3_round_rate,
> > > +	.set_rate	= clk_pllv3_genericv2_set_rate,
> > > +};
> > > +
> > >   static unsigned long clk_pllv3_sys_recalc_rate(struct clk_hw *hw,
> > >   					       unsigned long parent_rate)
> > >   {
> > > @@ -407,6 +443,13 @@ static const struct clk_ops clk_pllv3_enet_ops = {
> > >   	.recalc_rate	= clk_pllv3_enet_recalc_rate,
> > >   };
> > >
> > > +void imx_clk_hw_pll3_powerbit(struct clk_hw *hw, u8 shift)
> > > +{
> > > +	struct clk_pllv3 *pll = to_clk_pllv3(hw);
> > > +
> > > +	pll->power_bit = shift;
> > > +}
> > > +
> >
> > I can see why you need this, but I think the approach is not quite
> > right.
>
> I wasn't sure if modifying the function like that was appropriate for this,
> but sense it is I will do like you said.
>
> > I suggest we rename the imx_clk_hw_pllv3 to __imx_clk_hw_pllv3 and add
> > the power_bit parameter to it (and set it accordingly inside).
> >
> > Then we should do the following in imx/clk.h:
> >
> > #define imx_clk_hw_pllv3(name, parent_names, num_parents, parent,	\
> > 				bypass1, bypass2, base, flags)		\
> > 	__imx_clk_hw_pllv3(name, parent_names, num_parents, parent,	\
> > 				bypass1, bypass2, base, flags, BM_PLL_POWER)
>
> One problem BM_PLL_POWER will have to be in imx/clk.h, but then it will be
> the only macro like it in the file, is line 9 ok for it.
> I could also make a function instead of a macro.
>

Line 9 is OK. #define will do.

There are macros like that for the composite clocks too.

> thanks,
> Jesse Taube
> > And then, the i.MXRT1170 can use the __imx_clk_hw_pllv3 and pass the
> > right power_bit shift.
> >
> > >   struct clk_hw *imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name,
> > >   			  const char *parent_name, void __iomem *base,
> > >   			  u32 div_mask)
> > > @@ -422,10 +465,20 @@ struct clk_hw *imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name,
> > >   		return ERR_PTR(-ENOMEM);
> > >
> > >   	pll->power_bit = BM_PLL_POWER;
> > > +	pll->lock_bit = BM_PLL_LOCK;
> > >   	pll->num_offset = PLL_NUM_OFFSET;
> > >   	pll->denom_offset = PLL_DENOM_OFFSET;
> > >
> > >   	switch (type) {
> > > +	case IMX_PLLV3_GENERICV2:
> > > +		pll->lock_bit = BM_PLL_LOCK_V2;
> > > +		pll->powerup_set = true;
> > > +		ops = &clk_pllv3_genericv2_ops;
> > > +		break;
> > > +	case IMX_PLLV3_SYSV2:
> > > +		pll->lock_bit = BM_PLL_LOCK_V2;
> > > +		pll->powerup_set = true;
> > > +		fallthrough;
> > >   	case IMX_PLLV3_SYS:
> > >   		ops = &clk_pllv3_sys_ops;
> > >   		break;
> > > diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
> > > index 5061a06468df..31e017248602 100644
> > > --- a/drivers/clk/imx/clk.h
> > > +++ b/drivers/clk/imx/clk.h
> > > @@ -242,6 +242,8 @@ struct clk_hw *imx_clk_hw_sscg_pll(const char *name,
> > >
> > >   enum imx_pllv3_type {
> > >   	IMX_PLLV3_GENERIC,
> > > +	IMX_PLLV3_GENERICV2,
> > > +	IMX_PLLV3_SYSV2,
> > >   	IMX_PLLV3_SYS,
> > >   	IMX_PLLV3_USB,
> > >   	IMX_PLLV3_USB_VF610,
> > > @@ -253,6 +255,8 @@ enum imx_pllv3_type {
> > >   	IMX_PLLV3_AV_IMX7,
> > >   };
> > >
> > > +void imx_clk_hw_pll3_powerbit(struct clk_hw *hw, u8 shift);
> > > +
> > >   struct clk_hw *imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name,
> > >   		const char *parent_name, void __iomem *base, u32 div_mask);
> > >
> > > --
> > > 2.36.1
> > >



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux