To act as an interrupt controller, a gpio bank relies on the "interrupt-parent" of the pin controller. When this optional "interrupt-parent" misses, do not create any IRQ domain. This fixes a "NULL pointer in stm32_gpio_domain_alloc()" kernel crash when the interrupt-parent = <exti> property is not declared in the Device Tree. Fixes: 0eb9f683336d ("pinctrl: Add IRQ support to STM32 gpios") Signed-off-by: Fabien Dessenne <fabien.dessenne@xxxxxxxxxxx> --- drivers/pinctrl/stm32/pinctrl-stm32.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c index 57a33fb0f2d7..14bcca73238a 100644 --- a/drivers/pinctrl/stm32/pinctrl-stm32.c +++ b/drivers/pinctrl/stm32/pinctrl-stm32.c @@ -1338,16 +1338,18 @@ static int stm32_gpiolib_register_bank(struct stm32_pinctrl *pctl, struct fwnode bank->secure_control = pctl->match_data->secure_control; spin_lock_init(&bank->lock); - /* create irq hierarchical domain */ - bank->fwnode = fwnode; + if (pctl->domain) { + /* create irq hierarchical domain */ + bank->fwnode = fwnode; - bank->domain = irq_domain_create_hierarchy(pctl->domain, 0, - STM32_GPIO_IRQ_LINE, bank->fwnode, - &stm32_gpio_domain_ops, bank); + bank->domain = irq_domain_create_hierarchy(pctl->domain, 0, STM32_GPIO_IRQ_LINE, + bank->fwnode, &stm32_gpio_domain_ops, + bank); - if (!bank->domain) { - err = -ENODEV; - goto err_clk; + if (!bank->domain) { + err = -ENODEV; + goto err_clk; + } } err = gpiochip_add_data(&bank->gpio_chip, bank); @@ -1510,6 +1512,8 @@ int stm32_pctl_probe(struct platform_device *pdev) pctl->domain = stm32_pctrl_get_irq_domain(pdev); if (IS_ERR(pctl->domain)) return PTR_ERR(pctl->domain); + if (!pctl->domain) + dev_warn(dev, "pinctrl without interrupt support\n"); /* hwspinlock is optional */ hwlock_id = of_hwspin_lock_get_id(pdev->dev.of_node, 0); -- 2.25.1