Re: [PATCH v2 3/5] pinctrl: mediatek: add rsel setting on mt8192

[Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>]

Hi Guodong,

thanks for the patch. Please see comments below.

On Fri, Jun 24, 2022 at 09:36:58PM +0800, Guodong Liu wrote:
> 1. I2C pins's resistance value can be controlled by rsel register.
> This patch provides rsel (resistance selection) setting on mt8192.
> 2. Also add the missing pull type array for mt8192 to document the
> pull type of each pin and prevent invalid pull type settings.
> 
> Signed-off-by: Guodong Liu <guodong.liu@xxxxxxxxxxxx>
> ---
>  drivers/pinctrl/mediatek/pinctrl-mt8192.c | 136 ++++++++++++++++++++++
>  1 file changed, 136 insertions(+)
> 
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8192.c b/drivers/pinctrl/mediatek/pinctrl-mt8192.c
> index efabeb422aea..ffb0b04f0e3c 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mt8192.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mt8192.c

<snip>

> +	MTK_PULL_PU_PD_TYPE,/*100* MTK_PULL_PU_PD_TYPE,/*101*/
> +	MTK_PULL_PU_PD_TYPE,/*102* MTK_PULL_PU_PD_TYPE,/*103*/
> +	MTK_PULL_PU_PD_TYPE,/*104* MTK_PULL_PU_PD_TYPE,/*105*/
> +	MTK_PULL_PU_PD_TYPE,/*106* MTK_PULL_PU_PD_TYPE,/*107*/
> +	MTK_PULL_PU_PD_TYPE,/*108* MTK_PULL_PU_PD_TYPE,/*109*/
> +	MTK_PULL_PU_PD_TYPE,/*110* MTK_PULL_PU_PD_TYPE,/*111*/
> +	MTK_PULL_PU_PD_TYPE,/*112* MTK_PULL_PU_PD_TYPE,/*113*/
> +	MTK_PULL_PU_PD_TYPE,/*114* MTK_PULL_PU_PD_TYPE,/*115*/
> +	MTK_PULL_PU_PD_TYPE,/*116* MTK_PULL_PU_PD_TYPE,/*117*/

The comments on pins 100 - 116 are missing the closing '/', effectively
commenting out pins 101 - 117 and leading to errors. Please fix this.

Other than that,

Reviewed-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
Tested-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>

Thanks,
Nícolas