Re: [PATCH v2 02/17] regmap-irq: Add get_irq_reg to support unusual register layouts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Matti Vaittinen <mazziesaccount@xxxxxxxxx> writes:

> Hi dee Ho peeps!
>
> Sorry for the late reply.
>
> pe 10. kesäk. 2022 klo 18.43 Aidan MacDonald
> (aidanmacdonald.0x0@xxxxxxxxx) kirjoitti:
>>
>> Mark Brown <broonie@xxxxxxxxxx> writes:
>>
>> > On Tue, Jun 07, 2022 at 04:53:09PM +0100, Aidan MacDonald wrote:
>> >
>> >> -    if (!chip->sub_reg_offsets || !chip->not_fixed_stride) {
>> >> +    if (chip->get_irq_reg) {
>> >> +            reg = chip->get_irq_reg(base_reg, i);
>> >> +    } else if (!chip->sub_reg_offsets || !chip->not_fixed_stride) {
>> >
>> > It seems like it would be cleaner and clearer to refactor things so that
>> > we always have a get_irq_reg() with standard chips getting given a
>> > default implementation which implements the current behaviour.
>>
>> I don't think that is a good way to clean things up. I only intended
>> get_irq_reg() to be a quick hack to solve a problem; in my opinion it
>> would be a poor abstraction to base the API around.
>>
>> What I'd suggest is something that will simplify regmap-irq. Instead of
>> defining the base registers, etc. in the chip, introduce a new struct
>> to describe a register group:
>>
>>     struct regmap_irq_reg_group {
>>         unsigned int status_base;
>>         unsigned int mask_base;
>>         ...
>>
>>         unsigned int irq_reg_stride;
>>
>>         int num_regs;
>>     };
>>
>> The idea is that the registers in a group are linearly mapped using the
>> formula "base + (i * irq_reg_stride)". Then it's possible to allow for
>> multiple register groups in regmap_irq_chip:
>>
>>     struct regmap_irq_chip {
>>         const struct regmap_irq_reg_group *groups;
>>         unsigned int num_groups;
>>
>>         unsigned int main_status_base;
>>         unsigned int num_main_status_bits;
>>         int num_main_regs;
>>
>>         ...
>>     };
>>
>> It should be straightforward to fit existing chips into this model.
>>
>> - Chips that use a main status + sub-block IRQ layout will define
>>   one register group for each sub-block and continue to describe the
>>   location of the main status registers inside of regmap_irq_chip.
>>   A group will only get polled if the corresponding main status bit
>>   is set -- n'th group is polled if n'th bit is set.
>
> Does this work for devices where a single main status bit can flag
> IRQs in more than one sub-registers?
>
> Best Regards
>  -- Matti

No, I realized once I got into the refactor that what I outlined here
wouldn't fit that use case well, which is what rohm-bd71828 needs.

There are some other complications with this approach, like how to
go between IRQs and register groups efficiently, and it's generally
a rather heavyweight solution. It might be useful for handling very
hierarchical chips, but I couldn't justify the added complexity when
most chips don't need it -- after all most chips behind slow busses
will have a small number of interrupts and a fairly flat structure.

In the end I went with Mark's suggestion to factor things out around
->get_irq_reg(). At first I thought there might be too many "gotchas"
that'd limit its usefulness, but in the end it proved to be a better
option and a lot easier to implement.




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux