Re: [PATCH v5 0/5] Renesas RZ/G2L IRQC support

["Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>]

Hi Marc

On Mon, May 23, 2022 at 6:42 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
>
> Hi All,
>
> The RZ/G2L Interrupt Controller is a front-end for the GIC found on
> Renesas RZ/G2L SoC's with below pins:
> - IRQ sense select for 8 external interrupts, mapped to 8 GIC SPI
>   interrupts
> - GPIO pins used as external interrupt input pins out of GPIOINT0-122 a
>   maximum of only 32 can be mapped to 32 GIC SPI interrupts,
> - NMI edge select.
>
>                                                              _____________
>                                                              |    GIC     |
>                                                              |  ________  |
>                                       ____________           | |        | |
> NMI --------------------------------->|          |  SPI0-479 | | GIC-600| |
>              _______                  |          |------------>|        | |
>              |      |                 |          |  PPI16-31 | |        | |
>              |      | IRQ0-IRQ7       |   IRQC   |------------>|        | |
> P0_P48_4 --->| GPIO |---------------->|          |           | |________| |
>              |      |GPIOINT0-122     |          |           |            |
>              |      |---------------->| TINT0-31 |           |            |
>              |______|                 |__________|           |____________|
>
> The proposed patches add hierarchical IRQ domain, one in IRQC driver and
> another in pinctrl driver. Upon interrupt requests map the interrupt to
> GIC. Out of GPIOINT0-122 only 32 can be mapped to GIC SPI, this mapping is
> handled by the pinctrl and IRQC driver.
>
> Cheers,
> Prabhakar
>
> Changes for v4->v5:
> * Updated commit message for patch 3/5
> * Dropped interrupt-parent from and included RB tag from Geert for patch 4/5
> * Implemented init_valid_mask() callback
> * Dropped ngirq patch from previous series
> * Dropped patches 4/7 and 5/7 from previous patch series will handle it separately.
>
> Changes for v3->v4:
> * Updated description for interrupts-cells property in patch #1
> * Dropped the patch which overriding free callback in gpiolib
> * Used devm helpers in patch#2
> * Patch #4, #5 and #6 are newly added
> * In patch #7 dropped using gpio offset as hwirq
> * Implemented immutable GPIO in patch #7
> * Implemented child_offset_to_irq() callback in patch #7
>
> Changes for v2->v3:
> * Updated description for interrupts-cells property in patch #1
> * Included RB tag from Geert for binding patch
> * Fixed review comments pointed by Geert, Biju and Sergei.
>
> Changes for v1->v2:
> * Included RB tag from Rob
> * Fixed review comments pointed by Geert
> * included GPIO driver changes
>
> Changes for RFCV4 -> V1:
> * Used unevaluatedProperties.
> * Altered the sequence of reg property
> * Set the parent type
> * Used raw_spin_lock() instead of raw_spin_lock_irqsave()
> * Simplified parsing IRQ map.
> * Will send the GPIO and pinctrl changes as part of separate series
>
> Changes for RFC v4:
> * Used locking while RMW
> * Now using interrupts property instead of interrupt-map
> * Patch series depends on [0]
> * Updated binding doc
> * Fixed comments pointed by Andy
>
> [0] https://patchwork.kernel.org/project/linux-renesas-soc/patch/
> 20220316200633.28974-1-prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx/
>
> Changes for RFC v3:
> -> Re-structured the driver as a hierarchical irq domain instead of chained
> -> made use of IRQCHIP_* macros
> -> dropped locking
> -> Added support for IRQ0-7 interrupts
> -> Introduced 2 new patches for GPIOLIB
> -> Switched to using GPIOLIB for irqdomains in pinctrl
>
> RFC v2: https://patchwork.kernel.org/project/linux-renesas-soc/cover/
> 20210921193028.13099-1-prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx/
>
> RFC v1: https://patchwork.kernel.org/project/linux-renesas-soc/cover/
> 20210803175109.1729-1-prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx/
>
> Lad Prabhakar (5):
>   dt-bindings: interrupt-controller: Add Renesas RZ/G2L Interrupt
>     Controller
>   irqchip: Add RZ/G2L IA55 Interrupt Controller driver
>   gpio: gpiolib: Allow free() callback to be overridden
>   dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Document the properties
>     to handle GPIO IRQ
>   pinctrl: renesas: pinctrl-rzg2l: Add IRQ domain to handle GPIO
>     interrupt
>
>  .../renesas,rzg2l-irqc.yaml                   | 133 ++++++
>  .../pinctrl/renesas,rzg2l-pinctrl.yaml        |  15 +
>  drivers/gpio/gpiolib.c                        |   9 +-
>  drivers/irqchip/Kconfig                       |   8 +
>  drivers/irqchip/Makefile                      |   1 +
>  drivers/irqchip/irq-renesas-rzg2l.c           | 425 ++++++++++++++++++
>  drivers/pinctrl/renesas/pinctrl-rzg2l.c       | 236 ++++++++++
>  7 files changed, 824 insertions(+), 3 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
>  create mode 100644 drivers/irqchip/irq-renesas-rzg2l.c
>
Gentle ping.

Are you happy with this series?

Cheers,
Prabhakar