Re: [PATCH v3 06/16] dt-bindings: gpio: Add AXP192 GPIO bindings

[Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>]

On 18/06/2022 23:39, Aidan MacDonald wrote:
> The AXP192 PMIC is different enough from the PMICs supported by
> the AXP20x GPIO driver to warrant a separate driver. The AXP192
> driver also supports interrupts and pinconf settings.
> 
> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
> ---
>  .../bindings/gpio/x-powers,axp192-gpio.yaml   | 68 +++++++++++++++++++
>  1 file changed, 68 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml
> 
> diff --git a/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml b/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml
> new file mode 100644
> index 000000000000..1e368cac9d3a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml
> @@ -0,0 +1,68 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/gpio/x-powers,axp192-gpio.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: X-Powers AXP192 GPIO Device Tree Bindings
> +
> +maintainers:
> +  - Chen-Yu Tsai <wens@xxxxxxxx>
> +
> +properties:
> +  compatible:
> +    const: x-powers,axp192-gpio
> +
> +  gpio-controller: true
> +
> +  "#gpio-cells":
> +    const: 2
> +    description: >
> +      The first cell is the pin number and the second is the GPIO flags.
> +
> +  gpio-ranges:
> +    maxItems: 1
> +
> +patternProperties:
> +  "-pins$":
> +    $ref: /schemas/pinctrl/pinmux-node.yaml#
> +
> +    properties:
> +      pins:
> +        items:
> +          enum:
> +            - GPIO0
> +            - GPIO1
> +            - GPIO2
> +            - GPIO3
> +            - GPIO4
> +            - N_RSTO
> +
> +      function:
> +        enum:
> +          - output
> +          - input
> +          - ldo
> +          - pwm
> +          - adc
> +          - low_output
> +          - floating
> +          - ext_chg_ctl
> +          - ldo_status
> +
> +required:
> +  - compatible
> +  - "#gpio-cells"
> +  - gpio-controller
> +  - gpio-ranges
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    pinctrl0: gpio@0 {

Unit address without reg, that's not a valid DTS.

> +        compatible = "x-powers,axp192-gpio";
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +        gpio-ranges = <&pinctrl0 0 0 6>;
> +    };


Best regards,
Krzysztof