Re: [PATCH v3 12/16] power: supply: axp20x_usb_power: Add support for AXP192

[Andy Shevchenko <andy.shevchenko@xxxxxxxxx>]

On Sat, Jun 18, 2022 at 11:40 PM Aidan MacDonald
<aidanmacdonald.0x0@xxxxxxxxx> wrote:
>
> The AXP192 is mostly the same as the AXP202 but has a different
> current limit.

...

> +       int ret = regmap_read(power->regmap, AXP20X_VBUS_IPSOUT_MGMT, &v);
> +
> +       if (ret)
> +               return ret;

Please, split assignment, so it will be like

  int ret;

  ret = ...
  if (ret)

...

> +static int axp192_usb_power_set_current_max(struct axp20x_usb_power *power,
> +                                           int intval)
> +{
> +       int val = AXP192_VBUS_CLIMIT_EN;
> +       const int mask = AXP192_VBUS_CLIMIT_EN | AXP192_VBUS_CLIMIT_100mA;
> +
> +       switch (intval) {
> +       case 100000:
> +               val |= AXP192_VBUS_CLIMIT_100mA;

> +               fallthrough;

It's harder to part and error prone, can't you simply call a
regmap_update_bits with different arguments?

With this suggestion consider the defaults like these:

      const int mask = AXP192_VBUS_CLIMIT_EN | AXP192_VBUS_CLIMIT_100mA;
      int val = mask;

Then use  val & ~AXP192_VBUS_CLIMIT_100mA in the below case.

> +       case 500000:
> +               return regmap_update_bits(power->regmap,
> +                                         AXP20X_VBUS_IPSOUT_MGMT, mask, val);
> +       default:
> +               return -EINVAL;
> +       }
> +}

-- 
With Best Regards,
Andy Shevchenko