[PATCH 0/4] AXP221/AXP223/AXP809 GPIO support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series hooks up the GPIO controller found in some older X-Powers
PMICs. The main motivation is converting the U-Boot driver over to use
devicetree, but Linux might as well gain support for the hardware too.


Samuel Holland (4):
  dt-bindings: gpio: Add AXP221/AXP223/AXP809 compatibles
  mfd: axp20x: Add AXP221/AXP223/AXP809 GPIO cells
  pinctrl: axp209: Support the AXP221/AXP223/AXP809 variant
  ARM: dts: axp22x/axp809: Add GPIO controller nodes

 .../bindings/gpio/x-powers,axp209-gpio.yaml   |  7 +++++++
 arch/arm/boot/dts/axp22x.dtsi                 | 18 ++++++++++++++++++
 arch/arm/boot/dts/axp809.dtsi                 | 19 +++++++++++++++++++
 drivers/mfd/axp20x.c                          |  9 +++++++++
 drivers/pinctrl/pinctrl-axp209.c              | 14 +++++++++++---
 5 files changed, 64 insertions(+), 3 deletions(-)

-- 
2.35.1




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux