Re: [PATCH v2 10/17] iio: adc: axp20x_adc: Minor code cleanups

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 

Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> writes:

> On Tue,  7 Jun 2022 16:53:17 +0100
> Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx> wrote:
>
>> The code may be clearer if parameters are not re-purposed to hold
>> temporary results like register values, so introduce local variables
>> as necessary to avoid that. Also, use the common FIELD_PREP macro
>> instead of a hand-rolled version.
>> 
>> Suggested-by: Jonathan Cameron <jic23@xxxxxxxxxx>
>> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
>
> Hi Aidan,
>
> Looks good.  One trivial further suggestion inline.
>
> Also, am I fine picking up the IIO patches, or does the whole
> set need to go in via mfd?
>
> Thanks,
>
> Jonathan
>

I think it has to go through mfd because of the GPIO2-3 ADC registers
which are added in the mfd patch. Cleanups are okay to pick up though.

>> ---
>>  drivers/iio/adc/axp20x_adc.c | 61 +++++++++++++++++++-----------------
>>  1 file changed, 33 insertions(+), 28 deletions(-)
>> 
>> diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c
>> index 53bf7d4899d2..9d5b1de24908 100644
>> --- a/drivers/iio/adc/axp20x_adc.c
>> +++ b/drivers/iio/adc/axp20x_adc.c
>> @@ -15,6 +15,7 @@
>>  #include <linux/property.h>
>>  #include <linux/regmap.h>
>>  #include <linux/thermal.h>
>> +#include <linux/bitfield.h>
>>  
>>  #include <linux/iio/iio.h>
>>  #include <linux/iio/driver.h>
>> @@ -22,20 +23,20 @@
>>  #include <linux/mfd/axp20x.h>
>>  
>>  #define AXP20X_ADC_EN1_MASK			GENMASK(7, 0)
>> -
>>  #define AXP20X_ADC_EN2_MASK			(GENMASK(3, 2) | BIT(7))
>> +
>>  #define AXP22X_ADC_EN1_MASK			(GENMASK(7, 5) | BIT(0))
>>  
>>  #define AXP20X_GPIO10_IN_RANGE_GPIO0		BIT(0)
>>  #define AXP20X_GPIO10_IN_RANGE_GPIO1		BIT(1)
>> -#define AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(x)	((x) & BIT(0))
>> -#define AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(x)	(((x) & BIT(0)) << 1)
>>  
>>  #define AXP20X_ADC_RATE_MASK			GENMASK(7, 6)
>> -#define AXP813_V_I_ADC_RATE_MASK		GENMASK(5, 4)
>> -#define AXP813_ADC_RATE_MASK			(AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK)
>>  #define AXP20X_ADC_RATE_HZ(x)			((ilog2((x) / 25) << 6) & AXP20X_ADC_RATE_MASK)
>> +
>>  #define AXP22X_ADC_RATE_HZ(x)			((ilog2((x) / 100) << 6) & AXP20X_ADC_RATE_MASK)
>> +
>> +#define AXP813_V_I_ADC_RATE_MASK		GENMASK(5, 4)
>> +#define AXP813_ADC_RATE_MASK			(AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK)
>>  #define AXP813_TS_GPIO0_ADC_RATE_HZ(x)		AXP20X_ADC_RATE_HZ(x)
>>  #define AXP813_V_I_ADC_RATE_HZ(x)		((ilog2((x) / 100) << 4) & AXP813_V_I_ADC_RATE_MASK)
>>  #define AXP813_ADC_RATE_HZ(x)			(AXP20X_ADC_RATE_HZ(x) | AXP813_V_I_ADC_RATE_HZ(x))
>> @@ -234,7 +235,7 @@ static int axp20x_adc_raw(struct iio_dev *indio_dev,
>>  			  struct iio_chan_spec const *chan, int *val)
>>  {
>>  	struct axp20x_adc_iio *info = iio_priv(indio_dev);
>> -	int size = 12;
>> +	int ret, size;
>>  
>>  	/*
>>  	 * N.B.:  Unlike the Chinese datasheets tell, the charging current is
>> @@ -246,10 +247,11 @@ static int axp20x_adc_raw(struct iio_dev *indio_dev,
>>  	else
>>  		size = 12;
>>  
>> -	*val = axp20x_read_variable_width(info->regmap, chan->address, size);
>> -	if (*val < 0)
>> -		return *val;
>> +	ret = axp20x_read_variable_width(info->regmap, chan->address, size);
>> +	if (ret < 0)
>> +		return ret;
>>  
>> +	*val = ret;
>>  	return IIO_VAL_INT;
>>  }
>>  
>> @@ -257,11 +259,13 @@ static int axp22x_adc_raw(struct iio_dev *indio_dev,
>>  			  struct iio_chan_spec const *chan, int *val)
>>  {
>>  	struct axp20x_adc_iio *info = iio_priv(indio_dev);
>> +	int ret;
>>  
>> -	*val = axp20x_read_variable_width(info->regmap, chan->address, 12);
>> -	if (*val < 0)
>> -		return *val;
>> +	ret = axp20x_read_variable_width(info->regmap, chan->address, 12);
>> +	if (ret < 0)
>> +		return ret;
>>  
>> +	*val = ret;
>>  	return IIO_VAL_INT;
>>  }
>>  
>> @@ -269,11 +273,13 @@ static int axp813_adc_raw(struct iio_dev *indio_dev,
>>  			  struct iio_chan_spec const *chan, int *val)
>>  {
>>  	struct axp20x_adc_iio *info = iio_priv(indio_dev);
>> +	int ret;
>>  
>> -	*val = axp20x_read_variable_width(info->regmap, chan->address, 12);
>> -	if (*val < 0)
>> -		return *val;
>> +	ret = axp20x_read_variable_width(info->regmap, chan->address, 12);
>> +	if (ret < 0)
>> +		return ret;
>>  
>> +	*val = ret;
>>  	return IIO_VAL_INT;
>>  }
>>  
>> @@ -443,27 +449,27 @@ static int axp20x_adc_offset_voltage(struct iio_dev *indio_dev, int channel,
>>  				     int *val)
>>  {
>>  	struct axp20x_adc_iio *info = iio_priv(indio_dev);
>> +	unsigned int regval;
>>  	int ret;
>>  
>> -	ret = regmap_read(info->regmap, AXP20X_GPIO10_IN_RANGE, val);
>> +	ret = regmap_read(info->regmap, AXP20X_GPIO10_IN_RANGE, &regval);
>>  	if (ret < 0)
>>  		return ret;
>>  
>>  	switch (channel) {
>>  	case AXP20X_GPIO0_V:
>> -		*val &= AXP20X_GPIO10_IN_RANGE_GPIO0;
>> +		regval &= AXP20X_GPIO10_IN_RANGE_GPIO0;
>
> Maybe use FIELD_GET() here to be clear you are extracting that
> field (even though we don't care about the shift).
>
> Hopefully the compiler will be clever enough to remove the shift
> anyway and using FIELD_GET() would act as slightly more 'documentation
> in code'.
>

You're probably right; I erred on the side of premature optimization.
I'll go back to FIELD_GET in the v3 since I've got to resend anyway.

>>  		break;
>>  
>>  	case AXP20X_GPIO1_V:
>> -		*val &= AXP20X_GPIO10_IN_RANGE_GPIO1;
>> +		regval &= AXP20X_GPIO10_IN_RANGE_GPIO1;
>>  		break;
>>  
>>  	default:
>>  		return -EINVAL;
>>  	}
>>  
>> -	*val = *val ? 700000 : 0;
>> -
>> +	*val = regval ? 700000 : 0;
>>  	return IIO_VAL_INT;
>>  }
>>  
>> @@ -548,7 +554,7 @@ static int axp20x_write_raw(struct iio_dev *indio_dev,
>>  			    long mask)
>>  {
>>  	struct axp20x_adc_iio *info = iio_priv(indio_dev);
>> -	unsigned int reg, regval;
>> +	unsigned int regmask, regval;
>>  
>>  	/*
>>  	 * The AXP20X PMIC allows the user to choose between 0V and 0.7V offsets
>> @@ -560,25 +566,24 @@ static int axp20x_write_raw(struct iio_dev *indio_dev,
>>  	if (val != 0 && val != 700000)
>>  		return -EINVAL;
>>  
>> -	val = val ? 1 : 0;
>> +	regval = val ? 1 : 0;
>>  
>>  	switch (chan->channel) {
>>  	case AXP20X_GPIO0_V:
>> -		reg = AXP20X_GPIO10_IN_RANGE_GPIO0;
>> -		regval = AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(val);
>> +		regmask = AXP20X_GPIO10_IN_RANGE_GPIO0;
>> +		regval = FIELD_PREP(AXP20X_GPIO10_IN_RANGE_GPIO0, regval);
>>  		break;
>>  
>>  	case AXP20X_GPIO1_V:
>> -		reg = AXP20X_GPIO10_IN_RANGE_GPIO1;
>> -		regval = AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(val);
>> +		regmask = AXP20X_GPIO10_IN_RANGE_GPIO1;
>> +		regval = FIELD_PREP(AXP20X_GPIO10_IN_RANGE_GPIO1, regval);
>>  		break;
>>  
>>  	default:
>>  		return -EINVAL;
>>  	}
>>  
>> -	return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE, reg,
>> -				  regval);
>> +	return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE, regmask, regval);
>>  }
>>  
>>  static const struct iio_info axp20x_adc_iio_info = {
[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux