Jonathan Cameron <jic23@xxxxxxxxxx> writes: > On Fri, 3 Jun 2022 14:57:07 +0100 > Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx> wrote: > >> The AXP192 is identical to the AXP20x, except for two additional >> GPIO ADC channels. >> >> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx> > > There is an argument that could be made here to say this should > have a fallback compatible to a suitable existing part as the driver > would work, we'd just be missing a couple of channels. > > I don't feel strongly either way, but thought I'd raise the possibility. > > I guess it's irrelevant if an updated kernel is needed anyway to have > it functional because of support needed for some other part of the chip > though. > > Jonathan > That may be possible, but you can't probe the IIO driver without having an updated MFD driver so I'm not sure a fallback compatible is needed. Regards, Aidan >> --- >> .../bindings/iio/adc/x-powers,axp209-adc.yaml | 18 ++++++++++++++++++ >> 1 file changed, 18 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml >> index d6d3d8590171..1a68e650ac7d 100644 >> --- a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml >> +++ b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml >> @@ -14,6 +14,23 @@ description: | >> Device is a child of an axp209 multifunction device >> ADC channels and their indexes per variant: >> >> + AXP192 >> + ------ >> + 0 | acin_v >> + 1 | acin_i >> + 2 | vbus_v >> + 3 | vbus_i >> + 4 | pmic_temp >> + 5 | gpio0_v >> + 6 | gpio1_v >> + 7 | gpio2_v >> + 8 | gpio3_v >> + 9 | ipsout_v >> + 10 | batt_v >> + 11 | batt_chrg_i >> + 12 | batt_dischrg_i >> + 13 | ts_v >> + >> AXP209 >> ------ >> 0 | acin_v >> @@ -50,6 +67,7 @@ description: | >> properties: >> compatible: >> oneOf: >> + - const: x-powers,axp192-adc >> - const: x-powers,axp209-adc >> - const: x-powers,axp221-adc >> - const: x-powers,axp813-adc