> The pinctrl registers that are used are all continguous (0x80020100 --
> 0x8002011c) .
Great. So long at the DT only has that register range, what you have
should be good.
Andrew
Re: [PATCH v3 2/4] pinctrl: mvebu: pinctrl driver for 98DX2530 SoC
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH v3 2/4] pinctrl: mvebu: pinctrl driver for 98DX2530 SoC
- From: Andrew Lunn <andrew@xxxxxxx>
- Date: Thu, 7 Apr 2022 01:17:59 +0200
- In-reply-to: <5033e1ed-a4bc-687a-40f5-767e89317ce3@alliedtelesis.co.nz>
- References: <20220406032158.1449049-1-chris.packham@alliedtelesis.co.nz> <20220406032158.1449049-3-chris.packham@alliedtelesis.co.nz> <Yk2JTo91sZHunEpN@lunn.ch> <5033e1ed-a4bc-687a-40f5-767e89317ce3@alliedtelesis.co.nz>
- References:
- [PATCH v3 0/4] arm64: mvebu: Support for Marvell 98DX2530 (and variants)
- From: Chris Packham
- [PATCH v3 2/4] pinctrl: mvebu: pinctrl driver for 98DX2530 SoC
- From: Chris Packham
- Re: [PATCH v3 2/4] pinctrl: mvebu: pinctrl driver for 98DX2530 SoC
- From: Andrew Lunn
- Re: [PATCH v3 2/4] pinctrl: mvebu: pinctrl driver for 98DX2530 SoC
- From: Chris Packham
- [PATCH v3 0/4] arm64: mvebu: Support for Marvell 98DX2530 (and variants)
- Prev by Date: Re: [PATCH v3 2/4] pinctrl: mvebu: pinctrl driver for 98DX2530 SoC
- Next by Date: Re: [PATCH v3 1/4] dt-bindings: pinctrl: mvebu: Document bindings for AC5
- Previous by thread: Re: [PATCH v3 2/4] pinctrl: mvebu: pinctrl driver for 98DX2530 SoC
- Next by thread: [PATCH v3 4/4] arm64: marvell: enable the 98DX2530 pinctrl driver
- Index(es):
 |