Hello! On 4/1/22 5:33 AM, frank zago wrote: > The I2C interface can run at 4 different speeds. This driver currently > only offer 100MHz. Tested with a variety of I2C sensors, and the IIO Maybe 100 KHz? It's a more common I2C speed. :-) > subsystem. > > Signed-off-by: frank zago <frank@xxxxxxxx> [...] MBR, Sergey
Re: [PATCH v5 3/3] i2c: ch341: add I2C MFD cell driver for the CH341
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH v5 3/3] i2c: ch341: add I2C MFD cell driver for the CH341
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- Date: Fri, 1 Apr 2022 14:49:50 +0300
- In-reply-to: <20220401023306.79532-4-frank@zago.net>
- Organization: Open Mobile Platform
- References: <20220401023306.79532-1-frank@zago.net> <20220401023306.79532-4-frank@zago.net>
- User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Thunderbird/78.10.1
- References:
- [PATCH v5 0/3] WCH CH341 GPIO and SPI support
- From: frank zago
- [PATCH v5 3/3] i2c: ch341: add I2C MFD cell driver for the CH341
- From: frank zago
- [PATCH v5 0/3] WCH CH341 GPIO and SPI support
- Prev by Date: Re: gpiolib: why does gpio_set_bias() suppress ENOTSUPP?
- Next by Date: Re: [PATCH v3] dt-bindings: gpio: add common consumer GPIO lines
- Previous by thread: [PATCH v5 3/3] i2c: ch341: add I2C MFD cell driver for the CH341
- Next by thread: Re: [PATCH v5 3/3] i2c: ch341: add I2C MFD cell driver for the CH341
- Index(es):
 |