On Mon, Mar 21, 2022 at 1:30 PM Hans Kurscheidt <lve0200@xxxxxxxxx> wrote: > > Despite deep searching, I cannot find any information, if gpiod allow > specifying pull-ups to input lines and how to do/handle it. Have you followed this code from libgpiod? https://git.kernel.org/pub/scm/libs/libgpiod/libgpiod.git/tree/tools/gpioset.c#n44 -- With Best Regards, Andy Shevchenko
Re: gpiod: Set pullup for Input Line
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: gpiod: Set pullup for Input Line
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Date: Mon, 21 Mar 2022 18:26:56 +0200
- In-reply-to: <97da941f-39da-4ded-0138-d1e71c4d3ecc@gmail.com>
- References: <97da941f-39da-4ded-0138-d1e71c4d3ecc@gmail.com>
- Follow-Ups:
- Re: gpiod: Set pullup for Input Line
- From: Hans Kurscheidt
- Re: gpiod: Set pullup for Input Line
- References:
- gpiod: Set pullup for Input Line
- From: Hans Kurscheidt
- gpiod: Set pullup for Input Line
- Prev by Date: Re: [PATCH v3] gpio: Restrict usage of GPIO chip irq members before initialization
- Next by Date: Re: [PATCH v4 1/3] mfd: ch341: add core driver for the WCH CH341 in I2C/GPIO mode
- Previous by thread: Re: gpiod: Set pullup for Input Line
- Next by thread: Re: gpiod: Set pullup for Input Line
- Index(es):
 |