[PATCH v2 2/8] MIPS: mscc: ocelot: fix MIIM1 pinctrl node name

[Michael Walle <michael@xxxxxxxx>]

The pinctrl device tree binding will be converted to YAML format. All
the pin nodes should end with "-pins". Fix them.

Fixes: a0553e01f85b ("MIPS: mscc: ocelot: add MIIM1 bus")
Signed-off-by: Michael Walle <michael@xxxxxxxx>
---
 arch/mips/boot/dts/mscc/ocelot.dtsi       | 4 ++--
 arch/mips/boot/dts/mscc/ocelot_pcb120.dts | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
index e51db651af13..cfc219a72bdd 100644
--- a/arch/mips/boot/dts/mscc/ocelot.dtsi
+++ b/arch/mips/boot/dts/mscc/ocelot.dtsi
@@ -225,7 +225,7 @@ uart2_pins: uart2-pins {
 				function = "uart2";
 			};
 
-			miim1: miim1 {
+			miim1_pins: miim1-pins {
 				pins = "GPIO_14", "GPIO_15";
 				function = "miim";
 			};
@@ -261,7 +261,7 @@ mdio1: mdio@10700c0 {
 			reg = <0x10700c0 0x24>;
 			interrupts = <15>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&miim1>;
+			pinctrl-0 = <&miim1_pins>;
 			status = "disabled";
 		};
 
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
index bd240690cb37..9d6b5717befb 100644
--- a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
@@ -40,7 +40,7 @@ &mdio0 {
 &mdio1 {
 	status = "okay";
 	pinctrl-names = "default";
-	pinctrl-0 = <&miim1>, <&phy_int_pins>, <&phy_load_save_pins>;
+	pinctrl-0 = <&miim1_pins>, <&phy_int_pins>, <&phy_load_save_pins>;
 
 	phy7: ethernet-phy@0 {
 		reg = <0>;
-- 
2.30.2