On Sun, Jan 30, 2022 at 3:54 PM Felix Fietkau <nbd@xxxxxxxx> wrote: > > From: John Crispin <john@xxxxxxxxxxx> > > Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32 > GPIOs. Each instance in DT is for a single bank. > > Acked-by: Bartosz Golaszewski <brgl@xxxxxxxx> > Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx> > Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx> > Signed-off-by: John Crispin <john@xxxxxxxxxxx> > Signed-off-by: Felix Fietkau <nbd@xxxxxxxx> > --- > drivers/gpio/Kconfig | 10 +++ > drivers/gpio/Makefile | 1 + > drivers/gpio/gpio-en7523.c | 137 +++++++++++++++++++++++++++++++++++++ > 3 files changed, 148 insertions(+) > create mode 100644 drivers/gpio/gpio-en7523.c > > diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig > index 60d9374c72c0..0e9aacbcb4bd 100644 > --- a/drivers/gpio/Kconfig > +++ b/drivers/gpio/Kconfig > @@ -247,6 +247,16 @@ config GPIO_EM > help > Say yes here to support GPIO on Renesas Emma Mobile SoCs. > > +config GPIO_EN7523 > + tristate "Airoha GPIO support" > + depends on ARCH_AIROHA > + default ARCH_AIROHA > + select GPIO_GENERIC > + select GPIOLIB_IRQCHIP > + help > + Say Y or M here to support the GPIO controller block on the > + Airoha EN7523 SoC. It supports two banks of 32 GPIOs. > + > config GPIO_EP93XX > def_bool y > depends on ARCH_EP93XX > diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile > index 71ee9fc2ff83..d2269ee0948e 100644 > --- a/drivers/gpio/Makefile > +++ b/drivers/gpio/Makefile > @@ -56,6 +56,7 @@ obj-$(CONFIG_GPIO_DLN2) += gpio-dln2.o > obj-$(CONFIG_GPIO_DWAPB) += gpio-dwapb.o > obj-$(CONFIG_GPIO_EIC_SPRD) += gpio-eic-sprd.o > obj-$(CONFIG_GPIO_EM) += gpio-em.o > +obj-$(CONFIG_GPIO_EN7523) += gpio-en7523.o > obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o > obj-$(CONFIG_GPIO_EXAR) += gpio-exar.o > obj-$(CONFIG_GPIO_F7188X) += gpio-f7188x.o > diff --git a/drivers/gpio/gpio-en7523.c b/drivers/gpio/gpio-en7523.c > new file mode 100644 > index 000000000000..f836a8db4c1d > --- /dev/null > +++ b/drivers/gpio/gpio-en7523.c > @@ -0,0 +1,137 @@ > +// SPDX-License-Identifier: GPL-2.0-only > + > +#include <linux/types.h> > +#include <linux/io.h> > +#include <linux/bits.h> > +#include <linux/gpio/driver.h> > +#include <linux/mod_devicetable.h> > +#include <linux/module.h> > +#include <linux/platform_device.h> > +#include <linux/property.h> > + > +#define AIROHA_GPIO_MAX 32 > + > +/** > + * airoha_gpio_ctrl - Airoha GPIO driver data > + * @gc: Associated gpio_chip instance. > + * @data: The data register. > + * @dir0: The direction register for the lower 16 pins. > + * @dir1: The direction register for the higher 16 pins. > + * @output: The output enable register. > + */ > +struct airoha_gpio_ctrl { > + struct gpio_chip gc; > + void __iomem *data; > + void __iomem *dir[2]; > + void __iomem *output; > +}; > + > +static struct airoha_gpio_ctrl *gc_to_ctrl(struct gpio_chip *gc) > +{ > + return container_of(gc, struct airoha_gpio_ctrl, gc); > +} > + > +static int airoha_dir_set(struct gpio_chip *gc, unsigned int gpio, > + int val, int out) > +{ > + struct airoha_gpio_ctrl *ctrl = gc_to_ctrl(gc); > + u32 dir = ioread32(ctrl->dir[gpio / 16]); > + u32 output = ioread32(ctrl->output); > + u32 mask = BIT((gpio % 16) * 2); > + > + if (out) { > + dir |= mask; > + output |= BIT(gpio); > + } else { > + dir &= ~mask; > + output &= ~BIT(gpio); > + } > + > + iowrite32(dir, ctrl->dir[gpio / 16]); > + > + if (out) > + gc->set(gc, gpio, val); > + > + iowrite32(output, ctrl->output); > + > + return 0; > +} > + > +static int airoha_dir_out(struct gpio_chip *gc, unsigned int gpio, > + int val) > +{ > + return airoha_dir_set(gc, gpio, val, 1); > +} > + > +static int airoha_dir_in(struct gpio_chip *gc, unsigned int gpio) > +{ > + return airoha_dir_set(gc, gpio, 0, 0); > +} > + > +static int airoha_get_dir(struct gpio_chip *gc, unsigned int gpio) > +{ > + struct airoha_gpio_ctrl *ctrl = gc_to_ctrl(gc); > + u32 dir = ioread32(ctrl->dir[gpio / 16]); > + u32 mask = BIT((gpio % 16) * 2); > + > + return (dir & mask) ? GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN; > +} > + > +static int airoha_gpio_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct airoha_gpio_ctrl *ctrl; > + int err; > + > + ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL); > + if (!ctrl) > + return -ENOMEM; > + > + ctrl->data = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(ctrl->data)) > + return PTR_ERR(ctrl->data); > + > + ctrl->dir[0] = devm_platform_ioremap_resource(pdev, 1); > + if (IS_ERR(ctrl->dir[0])) > + return PTR_ERR(ctrl->dir[0]); > + > + ctrl->dir[1] = devm_platform_ioremap_resource(pdev, 2); > + if (IS_ERR(ctrl->dir[1])) > + return PTR_ERR(ctrl->dir[1]); > + > + ctrl->output = devm_platform_ioremap_resource(pdev, 3); > + if (IS_ERR(ctrl->output)) > + return PTR_ERR(ctrl->output); > + > + err = bgpio_init(&ctrl->gc, dev, 4, ctrl->data, NULL, > + NULL, NULL, NULL, 0); > + if (err) > + return dev_err_probe(dev, err, "unable to init generic GPIO"); > + > + ctrl->gc.ngpio = AIROHA_GPIO_MAX; > + ctrl->gc.owner = THIS_MODULE; > + ctrl->gc.direction_output = airoha_dir_out; > + ctrl->gc.direction_input = airoha_dir_in; > + ctrl->gc.get_direction = airoha_get_dir; > + > + return devm_gpiochip_add_data(dev, &ctrl->gc, ctrl); > +} > + > +static const struct of_device_id airoha_gpio_of_match[] = { > + { .compatible = "airoha,en7523-gpio" }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, airoha_gpio_of_match); > + > +static struct platform_driver airoha_gpio_driver = { > + .driver = { > + .name = "airoha-gpio", > + .of_match_table = airoha_gpio_of_match, > + }, > + .probe = airoha_gpio_probe, > +}; > +module_platform_driver(airoha_gpio_driver); > + > +MODULE_DESCRIPTION("Airoha GPIO support"); > +MODULE_AUTHOR("John Crispin <john@xxxxxxxxxxx>"); > +MODULE_LICENSE("GPL v2"); > -- > 2.32.0 (Apple Git-132) > Queued for next, thanks! Bart