Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/01/2022 19:47, Bjorn Helgaas wrote:
  ok if the PCI maintainers decide otherwise.
I don't really like the "LEGACY_PCI" Kconfig option.  "Legacy" just
means something old and out of favor; it doesn't say*what*  that
something is.

I think you're specifically interested in I/O port space usage, and it
seems that you want all PCI drivers that*only*  use I/O port space to
depend on LEGACY_PCI?  Drivers that can use either I/O or memory
space or both would not depend on LEGACY_PCI?  This seems a little
murky and error-prone.
I'd like to hear Arnd's opinion on this but you're the PCI maintainer
so of course your buy-in would be quite important for such an option.
I'd like to hear Arnd's opinion, too.  If we do add LEGACY_PCI, I
think we need a clear guide for when to use it, e.g., "a PCI driver
that uses inb() must depend on LEGACY_PCI" or whatever it is.

I must be missing something because I don't see what we gain from
this.  We have PCI drivers, e.g., megaraid [1], for devices that have
either MEM or I/O BARs.  I think we want to build drivers like that on
any arch that supports PCI.

If the arch doesn't support I/O port space, devices that only have I/O
BARs won't work, of course, and hopefully the PCI core and driver can
figure that out and gracefully fail the probe.

But that same driver should still work with devices that have MEM
BARs.  If inb() isn't always present, I guess we could litter these
drivers with #ifdefs, but that would be pretty ugly.

There were some ifdefs added to the 8250 drivers in Arnd's original patch [0], but it does not seem included here.

Niklas, what happened to the 8250 and the other driver changes?

[0] https://lore.kernel.org/lkml/CAK8P3a0MNbx-iuzW_-=0ab6-TTZzwV-PT_6gAC1Gp5PgYyHcrA@xxxxxxxxxxxxxx/

IMO inb() should
be present but do something innocuous like return ~0, as it would if
I/O port space is supported but there's no device at that address.

[1]https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/scsi/megaraid.c?id=v5.15#n4210


That driver would prob not be used on systems which does not support PIO, and so could have a HAS_IOPORT dependency. But it is not strictly necessary.

Anyway, it would be good to have an idea of how much ifdeffery is required in drivers.

Thanks,
John



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux