The ocelot-ext driver requires the phys to be externally controlled by an optional parameter. This commit exposes that variable so it can be utilized. Signed-off-by: Colin Foster <colin.foster@xxxxxxxxxxxxxxxx> --- drivers/net/dsa/ocelot/seville_vsc9953.c | 3 ++- drivers/net/mdio/mdio-mscc-miim.c | 10 ++++++---- include/linux/mdio/mdio-mscc-miim.h | 3 ++- 3 files changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/net/dsa/ocelot/seville_vsc9953.c b/drivers/net/dsa/ocelot/seville_vsc9953.c index a7db8781310b..95619705e486 100644 --- a/drivers/net/dsa/ocelot/seville_vsc9953.c +++ b/drivers/net/dsa/ocelot/seville_vsc9953.c @@ -1021,7 +1021,8 @@ static int vsc9953_mdio_bus_alloc(struct ocelot *ocelot) rc = mscc_miim_setup(dev, &bus, "VSC9953 internal MDIO bus", ocelot->targets[GCB], - ocelot->map[GCB][GCB_MIIM_MII_STATUS & REG_MASK]); + ocelot->map[GCB][GCB_MIIM_MII_STATUS & REG_MASK], + NULL, 0); if (rc) { dev_err(dev, "failed to setup MDIO bus\n"); diff --git a/drivers/net/mdio/mdio-mscc-miim.c b/drivers/net/mdio/mdio-mscc-miim.c index 7d2abaf2b2c9..e16ab2ffacf6 100644 --- a/drivers/net/mdio/mdio-mscc-miim.c +++ b/drivers/net/mdio/mdio-mscc-miim.c @@ -188,7 +188,8 @@ static const struct regmap_config mscc_miim_regmap_config = { }; int mscc_miim_setup(struct device *dev, struct mii_bus **pbus, const char *name, - struct regmap *mii_regmap, int status_offset) + struct regmap *mii_regmap, int status_offset, + struct regmap *phy_regmap, int phy_offset) { struct mscc_miim_dev *miim; struct mii_bus *bus; @@ -210,6 +211,8 @@ int mscc_miim_setup(struct device *dev, struct mii_bus **pbus, const char *name, miim->regs = mii_regmap; miim->mii_status_offset = status_offset; + miim->phy_regs = phy_regmap; + miim->phy_reset_offset = phy_offset; *pbus = bus; @@ -257,15 +260,14 @@ static int mscc_miim_probe(struct platform_device *pdev) } } - ret = mscc_miim_setup(&pdev->dev, &bus, "mscc_miim", mii_regmap, 0); + ret = mscc_miim_setup(&pdev->dev, &bus, "mscc_miim", mii_regmap, 0, + phy_regmap, 0); if (ret < 0) { dev_err(&pdev->dev, "Unable to setup the MDIO bus\n"); return ret; } miim = bus->priv; - miim->phy_regs = phy_regmap; - miim->phy_reset_offset = 0; ret = of_mdiobus_register(bus, pdev->dev.of_node); if (ret < 0) { diff --git a/include/linux/mdio/mdio-mscc-miim.h b/include/linux/mdio/mdio-mscc-miim.h index 5b4ed2c3cbb9..5a95e43f73f9 100644 --- a/include/linux/mdio/mdio-mscc-miim.h +++ b/include/linux/mdio/mdio-mscc-miim.h @@ -14,6 +14,7 @@ int mscc_miim_setup(struct device *device, struct mii_bus **bus, const char *name, struct regmap *mii_regmap, - int status_offset); + int status_offset, struct regmap *phy_regmap, + int phy_offset); #endif -- 2.25.1