Re: [PATCH v6 3/4] dt-bindings: pinctrl: mt8195: add 'pins' wrapping node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Dec 12, 2021 at 04:40:13AM +0800, Tinghan Shen wrote:
> The mt8195 pinctrl driver requires a 'pins' subnode to wrap pin properties.

Why?

> Signed-off-by: Tinghan Shen <tinghan.shen@xxxxxxxxxxxx>
> ---
>  .../bindings/pinctrl/pinctrl-mt8195.yaml      | 307 +++++++++---------
>  1 file changed, 160 insertions(+), 147 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
> index 5e2bb2bf3a55..2035bf164740 100644
> --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
> @@ -59,133 +59,143 @@ properties:
>  patternProperties:
>    '-pins$':
>      type: object
> -    description: |
> -      A pinctrl node should contain at least one subnodes representing the
> -      pinctrl groups available on the machine. Each subnode will list the
> -      pins it needs, and how they should be configured, with regard to muxer
> -      configuration, pullups, drive strength, input enable/disable and
> -      input schmitt.
> -      An example of using macro:
> -      pincontroller {
> -        /* GPIO0 set as multifunction GPIO0 */
> -        gpio_pin {
> -          pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
> -        };
> -        /* GPIO8 set as multifunction SDA0 */
> -        i2c0_pin {
> -          pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> -        };
> -      };
> -    $ref: "pinmux-node.yaml"
> -
> -    properties:
> -      pinmux:
> -        description: |
> -          Integer array, represents gpio pin number and mux setting.
> -          Supported pin number and mux varies for different SoCs, and are defined
> -          as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
> -
> -      drive-strength:
> -        enum: [2, 4, 6, 8, 10, 12, 14, 16]
> -
> -      bias-pull-down:
> -        description: |
> -          For pull down type is normal, it don't need add RSEL & R1R0 define
> -          and resistance value.
> -          For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
> -          set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
> -          "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
> -          define in mt8195.
> -          For pull down type is RSEL, it can add RSEL define & resistance value(ohm)
> -          to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit".
> -          It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
> -          & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100"
> -          & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
> -          define in mt8195. It can also support resistance value(ohm) "75000" & "5000" in mt8195.
> -          oneOf:
> -            - enum: [100, 101, 102, 103]
> -            - description: mt8195 pull down PUPD/R0/R1 type define value.
> -            - enum: [200, 201, 202, 203, 204, 205, 206, 207]
> -            - description: mt8195 pull down RSEL type define value.
> -            - enum: [75000, 5000]
> -            - description: mt8195 pull down RSEL type si unit value(ohm).
> -
> -          An example of using RSEL define:
> -          pincontroller {
> -            i2c0_pin {
> -              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> -              bias-pull-down = <MTK_PULL_SET_RSEL_001>;
> -            };
> -          };
> -          An example of using si unit resistance value(ohm):
> -          &pio {
> -            mediatek,rsel_resistance_in_si_unit;
> -          }
> -          pincontroller {
> -            i2c0_pin {
> -              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> -              bias-pull-down = <75000>;
> -            };
> -          };
> -
> -      bias-pull-up:
> +    additionalProperties: false
> +    patternProperties:
> +      'pins':

Can we constrain this a bit more.

> +        type: object
> +        additionalProperties: false
>          description: |
> -          For pull up type is normal, it don't need add RSEL & R1R0 define
> -          and resistance value.
> -          For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
> -          set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
> -          "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
> -          define in mt8195.
> -          For pull up type is RSEL, it can add RSEL define & resistance value(ohm)
> -          to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit".
> -          It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
> -          & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100"
> -          & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
> -          define in mt8195. It can also support resistance value(ohm)
> -          "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8195.
> -          oneOf:
> -            - enum: [100, 101, 102, 103]
> -            - description: mt8195 pull up PUPD/R0/R1 type define value.
> -            - enum: [200, 201, 202, 203, 204, 205, 206, 207]
> -            - description: mt8195 pull up RSEL type define value.
> -            - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000]
> -            - description: mt8195 pull up RSEL type si unit value(ohm).
> -          An example of using RSEL define:
> +          A pinctrl node should contain at least one subnodes representing the
> +          pinctrl groups available on the machine. Each subnode will list the
> +          pins it needs, and how they should be configured, with regard to muxer
> +          configuration, pullups, drive strength, input enable/disable and
> +          input schmitt.
> +          An example of using macro:
>            pincontroller {
> -            i2c0_pin {
> -              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> -              bias-pull-up = <MTK_PULL_SET_RSEL_001>;
> +            /* GPIO0 set as multifunction GPIO0 */
> +            gpio_pin {
> +              pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
>              };
> -          };
> -          An example of using si unit resistance value(ohm):
> -          &pio {
> -            mediatek,rsel_resistance_in_si_unit;
> -          }
> -          pincontroller {
> +            /* GPIO8 set as multifunction SDA0 */
>              i2c0_pin {
>                pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> -              bias-pull-up = <1000>;
>              };
>            };
> -
> -      bias-disable: true
> -
> -      output-high: true
> -
> -      output-low: true
> -
> -      input-enable: true
> -
> -      input-disable: true
> -
> -      input-schmitt-enable: true
> -
> -      input-schmitt-disable: true
> -
> -    required:
> -      - pinmux
> -
> -    additionalProperties: false
> +        $ref: "pinmux-node.yaml"
> +
> +        properties:
> +          pinmux:
> +            description: |
> +              Integer array, represents gpio pin number and mux setting.
> +              Supported pin number and mux varies for different SoCs, and are
> +              defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h
> +              directly.
> +
> +          drive-strength:
> +            enum: [2, 4, 6, 8, 10, 12, 14, 16]
> +
> +          bias-pull-down:
> +            description: |
> +              For pull down type is normal, it don't need add RSEL & R1R0 define
> +              and resistance value.
> +              For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
> +              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
> +              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
> +              "MTK_PUPD_SET_R1R0_11" define in mt8195.
> +              For pull down type is RSEL, it can add RSEL define & resistance
> +              value(ohm) to set different resistance by identifying property
> +              "mediatek,rsel_resistance_in_si_unit".
> +              It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
> +              & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
> +              & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101"
> +              & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
> +              define in mt8195. It can also support resistance value(ohm)
> +              "75000" & "5000" in mt8195.
> +              oneOf:
> +                - enum: [100, 101, 102, 103]
> +                - description: mt8195 pull down PUPD/R0/R1 type define value.
> +                - enum: [200, 201, 202, 203, 204, 205, 206, 207]
> +                - description: mt8195 pull down RSEL type define value.
> +                - enum: [75000, 5000]
> +                - description: mt8195 pull down RSEL type si unit value(ohm).
> +
> +              An example of using RSEL define:
> +              pincontroller {
> +                i2c0_pin {
> +                  pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> +                  bias-pull-down = <MTK_PULL_SET_RSEL_001>;

Isn't this now out of date?

> +                };
> +              };
> +              An example of using si unit resistance value(ohm):
> +              &pio {
> +                mediatek,rsel_resistance_in_si_unit;
> +              }
> +              pincontroller {
> +                i2c0_pin {
> +                  pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> +                  bias-pull-down = <75000>;
> +                };
> +              };
> +
> +          bias-pull-up:
> +            description: |
> +              For pull up type is normal, it don't need add RSEL & R1R0 define
> +              and resistance value.
> +              For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
> +              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
> +              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
> +              "MTK_PUPD_SET_R1R0_11" define in mt8195.
> +              For pull up type is RSEL, it can add RSEL define & resistance
> +              value(ohm) to set different resistance by identifying property
> +              "mediatek,rsel_resistance_in_si_unit".
> +              It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
> +              & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
> +              & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101"
> +              & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
> +              define in mt8195. It can also support resistance value(ohm)
> +              "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" &
> +              "75000" in mt8195.
> +              oneOf:
> +                - enum: [100, 101, 102, 103]
> +                - description: mt8195 pull up PUPD/R0/R1 type define value.
> +                - enum: [200, 201, 202, 203, 204, 205, 206, 207]
> +                - description: mt8195 pull up RSEL type define value.
> +                - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000]
> +                - description: mt8195 pull up RSEL type si unit value(ohm).
> +              An example of using RSEL define:
> +              pincontroller {
> +                i2c0_pin {
> +                  pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> +                  bias-pull-up = <MTK_PULL_SET_RSEL_001>;
> +                };
> +              };
> +              An example of using si unit resistance value(ohm):
> +              &pio {
> +                mediatek,rsel_resistance_in_si_unit;
> +              }
> +              pincontroller {
> +                i2c0_pin {
> +                  pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> +                  bias-pull-up = <1000>;
> +                };
> +              };
> +
> +          bias-disable: true
> +
> +          output-high: true
> +
> +          output-low: true
> +
> +          input-enable: true
> +
> +          input-disable: true
> +
> +          input-schmitt-enable: true
> +
> +          input-schmitt-disable: true
> +
> +        required:
> +          - pinmux
>  
>  required:
>    - compatible
> @@ -201,30 +211,33 @@ additionalProperties: false
>  
>  examples:
>    - |
> -            #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
> -            #include <dt-bindings/interrupt-controller/arm-gic.h>
> -            pio: pinctrl@10005000 {
> -                    compatible = "mediatek,mt8195-pinctrl";
> -                    reg = <0x10005000 0x1000>,
> -                          <0x11d10000 0x1000>,
> -                          <0x11d30000 0x1000>,
> -                          <0x11d40000 0x1000>,
> -                          <0x11e20000 0x1000>,
> -                          <0x11eb0000 0x1000>,
> -                          <0x11f40000 0x1000>,
> -                          <0x1000b000 0x1000>;
> -                    reg-names = "iocfg0", "iocfg_bm", "iocfg_bl",
> -                          "iocfg_br", "iocfg_lm", "iocfg_rb",
> -                          "iocfg_tl", "eint";
> -                    gpio-controller;
> -                    #gpio-cells = <2>;
> -                    gpio-ranges = <&pio 0 0 144>;
> -                    interrupt-controller;
> -                    interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>;
> -                    #interrupt-cells = <2>;
> -
> -                    pio-pins {
> -                      pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
> -                      output-low;
> -                    };
> -            };
> +    #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #
> +    pio: pinctrl@10005000 {
> +      compatible = "mediatek,mt8195-pinctrl";
> +      reg = <0x10005000 0x1000>,
> +            <0x11d10000 0x1000>,
> +            <0x11d30000 0x1000>,
> +            <0x11d40000 0x1000>,
> +            <0x11e20000 0x1000>,
> +            <0x11eb0000 0x1000>,
> +            <0x11f40000 0x1000>,
> +            <0x1000b000 0x1000>;
> +      reg-names = "iocfg0", "iocfg_bm", "iocfg_bl",
> +                  "iocfg_br", "iocfg_lm", "iocfg_rb",
> +                  "iocfg_tl", "eint";
> +      gpio-controller;
> +      #gpio-cells = <2>;
> +      gpio-ranges = <&pio 0 0 144>;
> +      interrupt-controller;
> +      interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>;
> +      #interrupt-cells = <2>;
> +
> +      pio-pins {
> +        pins_bus {

Don't use '_' in node names.

> +          pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
> +          output-low;
> +        };
> +      };
> +    };
> -- 
> 2.18.0
> 
> 



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux