[PATCH 08/14] dt-bindings: interrupt-controller: Merge BCM3380 with BCM7120

[Florian Fainelli <f.fainelli@xxxxxxxxx>]

The two bindings are very similar and should be covered by the same
document, do that so we can get rid of an additional binding file.

Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
 .../brcm,bcm3380-l2-intc.txt                  | 39 -------------------
 .../brcm,bcm7120-l2-intc.yaml                 | 30 +++++++++++++-
 2 files changed, 28 insertions(+), 41 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt

diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt
deleted file mode 100644
index 37aea40d5430..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Broadcom BCM3380-style Level 1 / Level 2 interrupt controller
-
-This interrupt controller shows up in various forms on many BCM338x/BCM63xx
-chipsets.  It has the following properties:
-
-- outputs a single interrupt signal to its interrupt controller parent
-
-- contains one or more enable/status word pairs, which often appear at
-  different offsets in different blocks
-
-- no atomic set/clear operations
-
-Required properties:
-
-- compatible: should be "brcm,bcm3380-l2-intc"
-- reg: specifies one or more enable/status pairs, in the following format:
-  <enable_reg 0x4 status_reg 0x4>...
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- interrupts: specifies the interrupt line in the interrupt-parent controller
-  node, valid values depend on the type of parent interrupt controller
-
-Optional properties:
-
-- brcm,irq-can-wake: if present, this means the L2 controller can be used as a
-  wakeup source for system suspend/resume.
-
-Example:
-
-irq0_intc: interrupt-controller@10000020 {
-	compatible = "brcm,bcm3380-l2-intc";
-	reg = <0x10000024 0x4 0x1000002c 0x4>,
-	      <0x10000020 0x4 0x10000028 0x4>;
-	interrupt-controller;
-	#interrupt-cells = <1>;
-	interrupt-parent = <&cpu_intc>;
-	interrupts = <2>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
index e0c6dce40d13..8be7fe29e6a9 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7120-l2-intc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM7120-style Level 2 interrupt controller
+title: Broadcom BCM7120-style Level 2 and Broadcom BCM3380 Level 1 / Level 2
 
 maintainers:
   - Florian Fainelli <f.fainelli@xxxxxxxxx>
@@ -59,16 +59,31 @@ description: >
   ..
   31 ........................ X
 
+  The BCM3380 Level 1 / Level 2 interrrupt controller shows up in various forms
+  on many BCM338x/BCM63xx chipsets. It has the following properties:
+
+  - outputs a single interrupt signal to its interrupt controller parent
+
+  - contains one or more enable/status word pairs, which often appear at
+    different offsets in different blocks
+
+  - no atomic set/clear operations
+
 allOf:
   - $ref: /schemas/interrupt-controller.yaml#
 
 properties:
   compatible:
-    const: brcm,bcm7120-l2-intc
+    items:
+      - enum:
+          - brcm,bcm7120-l2-intc
+          - brcm,bcm3380-l2-intc
 
   reg:
     description: >
       Specifies the base physical address and size of the registers
+    minItems: 1
+    maxItems: 4
 
   interrupt-controller: true
 
@@ -121,3 +136,14 @@ examples:
       brcm,int-map-mask = <0xeb8>, <0x140>;
       brcm,int-fwd-mask = <0x7>;
     };
+
+  - |
+    irq1_intc: interrupt-controller@10000020 {
+       compatible = "brcm,bcm3380-l2-intc";
+       reg = <0x10000024 0x4>, <0x1000002c 0x4>,
+             <0x10000020 0x4>, <0x10000028 0x4>;
+       interrupt-controller;
+       #interrupt-cells = <1>;
+       interrupt-parent = <&cpu_intc>;
+       interrupts = <2>;
+    };
-- 
2.25.1