Re: [PATCH v4 12/16] pinctrl: starfive: Add pinctrl driver for StarFive SoCs

[Linus Walleij <linus.walleij@xxxxxxxxxx>]

On Tue, Nov 16, 2021 at 4:02 PM Emil Renner Berthing <kernel@xxxxxxxx> wrote:

> Add a combined pinctrl and GPIO driver for the JH7100 RISC-V SoC by
> StarFive Ltd. This is a test chip for their upcoming JH7110 SoC, which
> is said to feature only minor changes to these pinctrl/GPIO parts.
>
> For each "GPIO" there are two registers for configuring the output and
> output enable signals which may come from other peripherals. Among these
> are two special signals that are constant 0 and constant 1 respectively.
> Controlling the GPIOs from software is done by choosing one of these
> signals. In other words the same registers are used for both pin muxing
> and controlling the GPIOs, which makes it easier to combine the pinctrl
> and GPIO driver in one.
>
> I wrote the pinconf and pinmux parts, but the GPIO part of the code is
> based on the GPIO driver in the vendor tree written by Huan Feng with
> cleanups and fixes by Drew and me.
>
> Datasheet: https://github.com/starfive-tech/JH7100_Docs/blob/main/JH7100%20Data%20Sheet%20V01.01.04-EN%20(4-21-2021).pdf
> Co-developed-by: Huan Feng <huan.feng@xxxxxxxxxxxxxxxx>
> Signed-off-by: Huan Feng <huan.feng@xxxxxxxxxxxxxxxx>
> Signed-off-by: Emil Renner Berthing <kernel@xxxxxxxx>
> Co-developed-by: Drew Fustini <drew@xxxxxxxxxxxxxxx>
> Signed-off-by: Drew Fustini <drew@xxxxxxxxxxxxxxx>

Overall there is nothing wrong with this, and it is in nice shape.
Let's merge it:
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>

Yours,
Linus Walleij