In order to allow external control via SPI, memory-mapped areas must be changed to use the generic regmap interface. This is step 1, and is followed by an implementation that allows a custom regmap. Signed-off-by: Colin Foster <colin.foster@xxxxxxxxxxxxxxxx> --- drivers/pinctrl/pinctrl-ocelot.c | 65 +++++++++++++++++++++++++++----- 1 file changed, 55 insertions(+), 10 deletions(-) diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c index 6941c1b45b00..b9acb80d6b3f 100644 --- a/drivers/pinctrl/pinctrl-ocelot.c +++ b/drivers/pinctrl/pinctrl-ocelot.c @@ -152,7 +152,7 @@ struct ocelot_pinctrl { struct pinctrl_dev *pctl; struct gpio_chip gpio_chip; struct regmap *map; - void __iomem *pincfg; + struct regmap *pincfg; struct pinctrl_desc *desc; struct ocelot_pmx_func func[FUNC_MAX]; u8 stride; @@ -819,7 +819,11 @@ static int ocelot_hw_get_value(struct ocelot_pinctrl *info, int ret = -EOPNOTSUPP; if (info->pincfg) { - u32 regcfg = readl(info->pincfg + (pin * sizeof(u32))); + u32 regcfg; + + ret = regmap_read(info->pincfg, pin, ®cfg); + if (ret) + return ret; ret = 0; switch (reg) { @@ -843,6 +847,24 @@ static int ocelot_hw_get_value(struct ocelot_pinctrl *info, return ret; } +static int ocelot_pincfg_clrsetbits(struct ocelot_pinctrl *info, u32 regaddr, + u32 clrbits, u32 setbits) +{ + u32 val; + int ret; + + ret = regmap_read(info->pincfg, regaddr, &val); + if (ret) + return ret; + + val &= ~clrbits; + val |= setbits; + + ret = regmap_write(info->pincfg, regaddr, val); + + return ret; +} + static int ocelot_hw_set_value(struct ocelot_pinctrl *info, unsigned int pin, unsigned int reg, @@ -851,21 +873,23 @@ static int ocelot_hw_set_value(struct ocelot_pinctrl *info, int ret = -EOPNOTSUPP; if (info->pincfg) { - void __iomem *regaddr = info->pincfg + (pin * sizeof(u32)); ret = 0; switch (reg) { case PINCONF_BIAS: - ocelot_clrsetbits(regaddr, BIAS_BITS, val); + ret = ocelot_pincfg_clrsetbits(info, pin, BIAS_BITS, + val); break; case PINCONF_SCHMITT: - ocelot_clrsetbits(regaddr, SCHMITT_BIT, val); + ret = ocelot_pincfg_clrsetbits(info, pin, SCHMITT_BIT, + val); break; case PINCONF_DRIVE_STRENGTH: if (val <= 3) - ocelot_clrsetbits(regaddr, DRIVE_BITS, val); + ret = ocelot_pincfg_clrsetbits(info, pin, + DRIVE_BITS, val); else ret = -EINVAL; break; @@ -1340,10 +1364,31 @@ static const struct of_device_id ocelot_pinctrl_of_match[] = { {}, }; +static struct regmap *ocelot_pinctrl_create_pincfg(struct platform_device *pdev) +{ + void __iomem *base; + + const struct regmap_config regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = 32, + }; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) { + dev_dbg(&pdev->dev, "Failed to ioremap config registers (no extended pinconf)\n"); + return NULL; + } + + return devm_regmap_init_mmio(&pdev->dev, base, ®map_config); +} + static int ocelot_pinctrl_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct ocelot_pinctrl *info; + struct regmap *pincfg; void __iomem *base; int ret; struct regmap_config regmap_config = { @@ -1377,11 +1422,11 @@ static int ocelot_pinctrl_probe(struct platform_device *pdev) /* Pinconf registers */ if (info->desc->confops) { - base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(base)) - dev_dbg(dev, "Failed to ioremap config registers (no extended pinconf)\n"); + pincfg = ocelot_pinctrl_create_pincfg(pdev); + if (IS_ERR(pincfg)) + dev_dbg(dev, "Failed to create pincfg regmap\n"); else - info->pincfg = base; + info->pincfg = pincfg; } ret = ocelot_pinctrl_register(pdev, info); -- 2.25.1